-
• #2
The crack is the top bit, not the round yellowy area. That's paint loss.
5 Attachments
-
• #3
Interested but would need posting to Chelmsford Essex, if you don't get anyone wanting to collect
-
• #4
I don't have a box, so you'd have to post a box to me to put it in. I'd rather that someone would see it before buying, even though it works fine.
-
• #5
Geometry is 74.5 seat-tube, 73 head-tube, 56cm ctc top-tube.
CAAD 5 tubing.
-
• #6
Sold?
-
• #7
Damn, I thought my capo was in a bad state, these are great frames nevertheless and a joy to ride.
-
• #8
Sold?
No.
Damn, I thought my capo was in a bad state, these are great frames nevertheless and a joy to ride.
Looks a bit "ratty", but functions fine. I even bought a new saddle for it earlier in the week.
1 Attachment
-
• #9
As I haven't used this in the last month, might as well put it back up for sale. And I've reduced the price.
-
• #10
Hey bro I'm intrested please contact me here :i tamar999999@gmail.com
A 56cm Cannondale Capo frame with carbon Cannondale Ultra forks, from the far-off days of 2007. It rides fine, and I’ve been using it as a beater since the summer, with no problems.
There is an issue though… At some point it had a stuck seatpost, and to solve this the then owner cut the post in half, and hammered the stuck bit into the seat-tube. There is a bit of post down in the depths of the tube, but it doesn’t have an affect, unless you want to use a ridiculously seatpost. This also resulted in a largish dent in the top-tube, and a very small dent in one of the seat-stays. And there is a crack. This is at the bottom of the opening of the seat-tube. It’s been caused by the seatpost issues rather than anything connected with riding, or a design fault, so it’s showed no signs of getting worse when I’ve been using it, and the local bike shop said it shouldn’t be an issue. Doesn’t creak. A bit of damage to the carbon forks.
It’s currently still built up, so if you’re interested, but mildly concerned, and want to have a ride, you’re more than welcome to have a go.
£70 for a handbuilt in the USA frame, forks, headset bearings, seatpost clamp. I can include a 27.2 post, if you want it. SOLD
Pick up from Leyton, east London. Next to the Underground station/ASDA. Can probably deliver to Hackney, Bow, Old Street etc.
1 Attachment