Clearout of bits and bobs

Ok, so my surplus bike bits and bits 'for the next project' has become ridiculous. All of the stuff listed below has been used but still works. Prices do not include postage. based in Northumberland.

So here goes:
approx 2 meters of alligator ilink cable (same as nokon). mostly black but i had some red which i hid under bar tape etc. bit dusty, but in good condition. lighter than standard cables for any weight weenies
£10

Alloy Syntace base bars, pads and extensions with Cane Creek brake levers. these have been drilled on the underside to allow for internal cables. good nick, usual marks from bar tape / stem etc. sold

Shimano RSX 7 x 3 speed brifters. good condition and worked fine when they were taken off the bike before Xmas. £20

white LOOK Carbon bottle cage. not sure of exact weight. im sure google will tell you. this will make you faster. usual marks from bottle going in and out. £10
Adaptor for using SRAM gxp cranks in a Chris king BB £6 posted as it will fit in envelope

Black Planet X CNC brake calipers. these are lighter than light. worked fine when i used them but the spring has popped out one of them. its still there, just needs reattached. also need the little bolts that hold the cables in place. I think i mite be able to find some but failing that, i know planet x sent my mate some spare ones. sold

Metallic MTB riser bars. 62cm with shimano brakes / shifters (8x3) £10

Black MTB 64cm with Shimano XT shifters (9x3) and Yeti grips £10

Alhonga extra drop brake calipers. not sure exactly how long the drop is but it measures 6cm from the bottom of the brake shoe bit to the underside of the caliper. springs are still very springy £10

Deore XT rear mech. i think this is 6/7/8 speed but according to what i can find on google. serial number is RDM730 if you want to check it out. spring is still strong enough to destroy my knuckles as i was testing it. £10

unbranded mtb rigid forks for disc brakes. Alloy. 190mm of steerer, 1&1/8th diameter. £10

box of gubbins. includes some downtube adapters to run normal shifters, and approx 9 chainring bolts, as well as a couple of other bits. £5

3T alloy bars with 90mm Cinelli Quill stem. these are wrapped in brown 'leather' bar tape. they also have the clamps for some brakes / shifters etc £10

The next bit is my 'turbo trainer in a box'. basically a box of bits to chuck on my intended turbo trainer specific bike. Didnt happen, now surplus.

Well worn Tiagra 9 speed shifters and rear mech. lots of signs of 'worming' on both shifters. right shifter works really well, left shifter doesnt click at all. i used it on my steel turbo trainer bike with a 105 downtube shifter which i will also chuck in. I wouldnt really recommend these for any other use unless you can fix the left somehow and stick them on a pub bike. £15 all in

Shimano 105 Crankset with Specialites 53/39 chainrings. These are the champagne colour. This includes square taper bottom bracket, clipless / flat shimano spd pedals, and some standard flat pedals £20

Shimano 600 front mech. good nick for the age of it £5 or £2.50 if you buy the chainset above

Black suede Turbo saddle. great condition considering its age. looks really good on my fixie. doesnt suit my delicate if not slightly oversized derriere. £20

44cm Giant alloy drop bars with 100mm Easton stem. £10

the rest is stuff i will chuck in for free with any other purchase, and whatevers left is off to the local 'build a dude a bike' place.

Black 3t stem 90mm
Shiny alloy stem 120mm
not shiny alloy stem 130mm

53/39 chainrings in black, another shimano 53t chainring in silver (both 130BCD)

Bike Lock - New and unopened. the packaging suggests Lidl

SRAM GXP bottom bracket - not sure how good the bearings are. cant even work out which bike it came off.

if all stuff sells, donation will be made to forum.

Im not intending to retire on the sale of these goods either, so if im way off make me an offer. I would at least like to cover the cost of my new brooks saddle. dont think thats too much to ask

Pics here:
https://drive.google.com/folderview?id=0B_YjI4q0quZcR1p5Y1htM3RhV2M&usp=sharing

Dibs Black Planet X CNC brake calipers please.

Are the Syntace bars 26.0 mm clamp?

If so can I have them plzzzzzzzz?

Dibs rigid disc forks - any pics of the disc mount? are they IS or post?

jdmitch, no idea. ive never used discs. PM me your email and ill send a pic and any measurements to help you work it out.

Is the aligator links for brakes or gears? Does it include the PTFE liner?

Alloy Syntace base bars, pads and extensions with Cane Creek brake levers and Bike Lock please

Sorry kernow, bars are paid for already. Ill update thread. Ta

They work for both. No liners