Campag Record h/f x Mavic CXP33 wheelset, free 531 frame, Ambrosio wheels, cinelli, diatech,selle regal ti, discounts added...

For Sale;

Various bits and bobs originally for sale as complete bike in link below, all in used condition but been looked after and all completely functional.

https://www.lfgss.com/conversations/263815/

Raleigh 531 frame and non original steel fork complete with stronglight h/s
(bb and n/s crank arm in picture not included, no rack or mudguard mounts )
58ctc square NOW SOLD

Bought as nos (with various chips/scratches) and used as daily commuter so added a few more plus some surface rust where rear race blades were fitted, otherwise good solid condition.

£70 plus 15 delivery as located in Edinburgh
bank transfer or paypal with fees covered by buyer.

1 Attachment

Appologies for half a sales thread, just after realising the task at hand was probably beyond me the site seemed to go into meltdown and promptly kicked me out and wouldn't let me back in....

Anyway, here's a link to photos of individual bits for sale

https://flic.kr/p/rvJ2iL

Thomson is in almost new condition, everything else has been used and has marks to show but all been looked after and are completely functional. NOW SOLD

Thomson layback silver 27.2x410 (no gouges or scrapes) £30 NOW SOLD

Ambrosio silver wheelset 32h fixed/fixed, hubs spin well but not quite buttery, rear wheel never seen brake, front has rim wear but still plenty life left.(vittoria rubino pro 700x23c included, cog and lockring not included) £68 > £60

Brooks ti rails b17 champion special, scuffing to upper leather surface as per photos, otherwise mint with no adjustment to tensioner. £50 NOW SOLD

Selle San Marco regal ti white with copper rivets, 1" scrape to rear right hand side as pictured, otherwise used with loads of character, ti rails 290g. £35. > £30

Campagnolo brake calipers with original pads/holders, few wee marks but not bad condition, only one tensioner as per photo. £30 NOW SOLD

Dia tech dirty Harry lever, well used and a wee bit scuffed but will last for years to come. £8 > £6

Cinelli criterium bars 65-40 few wee scrapes to emblems but not bad. £18 > £15
Cinelli quill stem (engraved on top surface) very short length 70ctc? usual slight skuffing at insertion point and from upturned bike. £15 > £10 (£22 if taken together)

Brooks black (when new) bar tape free with any of the above if someone can recycle it. NOW GONE

Any questions or better or particular photos required please just ask, items in Edinburgh so prices all include UK delivery (happy to send further for more £s)
Usually PayPal (fees covered by buyer) or bank transfer.

@sacredhart has first refusal on frame/fork. NOW SOLD

Dibs on the seat post. Please.I've messaged

Thomson post and Brooks ti sold pp.

dibs on the campag brakes will PM

Campag calipers sold pp,

Brooks bar tape also gone.

Not heard back from @sacredhart so frame still available.

Super record high flange/mavic cxp33 wheelset (polished hubs/screw on freewheel thread ridden no more than 200 miles)

& various other odds & sods added tomorrow.

I pmd you Im after something with racj mounts cheers

Raleigh frame/fork/headset now sold pp.

First couple of pages updated to reflect sales, thanks to members for trouble free transactions....all other items still available....

SOLD: frame/fork/headset

         cranks/ring/bb/chain&sprocket
         thomson post
          brooks ti b17&bartape
          campagnolo chorus calipers.

Newly added For Sale;

Campagnolo (super?)record high flange road hubs laced to new mavic cxp33 clincher rims 36hole.

1 Attachment

white industries ENO freewheel is being listed seperately

1 Attachment

seen less than 200 miles since professionally built at Edinburgh bike co op

1 Attachment

absolutely no wear on either rim, did the decent thing and removed the garish cxp33 decals and left a single mavic emblem on each side of both wheels

1 Attachment

the eagle eyed may notice, 34 black spokes 2 silver either side of valve hole, had them laced to mimic my novatech jetflys.....build was @2yrs ago and must admit to not remembering particular brand of spoke, only that I paid roughly £60 for them so certainly of a decent quality.

1 Attachment

Had these wheels built up for a raleigh ti replica i owned at the time, they only ever had 4 or 5 shortish summer rides before a nos(25 years earlier) cassette gave up and dropped its ball bearings one by one over a 200yard stretch of road leaving me to push home. no damage to wheels and what was left of cassette was removed at lbs, that kind of killed the honeymoon period and bike was sold soon after minus these wheels I couldn't quite part with at the time.

Fast forward two years, original outlay almost forgotten and; wheels both supplied with original flat levered campagnolo quick release levers and generic rim tape. front hub has a light rumble to it, rear is smoother but still not buttery though both will be regreased at lbs while ENO freewheel is removed, rear hub is single threaded road hub.

As with other items, located in Edinburgh so delivery probably required. Seem to recall (may be slightly out) almost £200 on parts before id even paid for labour...realise that has no bearing on current value so how does £160 delivered (uk) sound, happy to dispatch further afield for more£.

as usual dibs>pm, bank transfer paypal gift etc etc

For Sale;
White Industries ENO freewheel 17t, bought from here and never used, in the process of receiving a track frame from here with no rear drilling so unlikely ever to use it now, completely serviceable little thing with a lovely sweet clickity click to it. cant recall what I paid but £40 delivered seems fair?
dibs>pm paypal gift/transfer blah blah......

1 Attachment

PRICE DROPS;

Ambrosio silver wheelset 32h fixed/fixed, hubs spin well but not quite buttery, rear wheel never seen brake, front has rim wear but still plenty life left, slight score on rim from poorly adjusted pad carrier as per photo.(vittoria rubino pros 700x23c included, cog and lockring not included) £68 > £60 (reflective tape easily removed)

Selle San Marco regal ti white with copper rivets, 1" scrape to rear right hand side as pictured, otherwise used with loads of character, ti rails 290g. £35. > £30

Dia tech dirty Harry lever, well used and a wee bit scuffed but will last for years to come. £8 > £6

Cinelli criterium bars 65-40 few wee scrapes to emblems but not bad. £18 > £15
Cinelli quill stem (engraved on top surface) very short length 70ctc? usual slight skuffing at insertion point and from upturned bike. £15 > £10 (£22 if taken together)

1 Attachment

rusty nuts included.....

1 Attachment

selle san marco regal Ti....

1 Attachment

Diatech dirty harry, left hand side

1 Attachment

cinelli stem.

1 Attachment

and again showing marks, slam it and they'll disappear.

1 Attachment

yup, bars

1 Attachment

......

1 Attachment

White Industries ENO freewheel 17t, bought from here and never used, in the process of receiving a track frame from here with no rear drilling so unlikely ever to use it now, completely serviceable little thing with a lovely sweet clickity click to it. cant recall what I paid but £40 > £38 delivered seems fair?
dibs>pm paypal gift/transfer blah blah......

1 Attachment