Clear out, Steel CX Frame, Chrome Bits, Trispoke

• #1

Miitch

Let me try again

Need to sell a few things as they are cluttering up the place
I'm based in SE5 - Denmark Hill area
All stuff can be collected or posted

Chrome Bullhorns with Brown Tape and Chrome Bar Ends - £SOLD
Used for 2 weeks from brand new before I swapped them off for straight bars
Standard Clamp
https://www.flickr.com/photos/124243570@N06/15469765100/

Foam Lock On Grips with New Bar End Plugs - £5
The silver locks and the plugs have never been fitted to a bike, they're brand new
https://www.flickr.com/photos/124243570@N06/15656158632/in/photostream/

Chrome brake set - £15
Taken off my fixie both parts of the rear brake (lever and calliper) have never been used, the front calliper has been used for around a month and the lever has not been used. The pads are therefore worn on the front.
These come with plastic clips to clip to frame and cable and housing for the back
https://www.flickr.com/photos/124243570@N06/15034584084/

Chromoly Black Forks 1 and 1/8" - £10
Used for less than 2 weeks from new before I upgraded to carbon forks
The entire time I used them I had them taped up with electrical tape
235mm steerer
Bit of headset left on there - can take it off if you want
https://www.flickr.com/photos/124243570@N06/15034589114/

Rad Int. Bodensee Rundfahrt Vintage Jersey - £12
It measures 48cm from pit to pit when laid flat
https://www.flickr.com/photos/124243570@N06/15473909550/

Chrome Deep V wheelset - £70 for pair
The front is practically brand new, the rear has been used more
I’ll probably include tyres and tubes in this price
The rear is flip-flop with 17t fixed and 17T Freewheel (both included)
Picture will be added shortly

Diamant cyclocross in Ishiwata 022 steel with mudguard eyes and canti mounts £100
It has had a basic repaint, not the finest job but is presentable
Top tube 55 c2c
Seat tube 54 c2c
It has a brand new headset
Pictures will be up shortly

HED. Clincher Trispoke - £150
This is a HED3 Rear trispoke wheel without axle
I was sold the wheel on the grounds that it could be converted to track
Having contacted HED. It turns out you can’t buy this axle anymore
I have contacted a few companies who say they can manufacture an axle I’m sure with a bit of knowhow you could make something of this wheel. I’m too busy to do this at the moment
This wheel does come with the correct freehub body however.
I bought this wheel for £150 a couple of months ago so I’d like that back, but I’m throwing in the freehub body in that price.
Pictures will be added shortly

Thanks for checking my stuff out
Miitch

• #2