Wanted (2): pursuit cockpit and seat and seatpost

Do scroll up to the most recent as I am continuously updating this thread.

I've started my lo pro build here and need some stuff for it:

1) seat post

a chrome/silver seat post, chrome and a quite long rail to limit mark (like 200mm). 27.2 mm SORTED

2) bullhorns

some silver nitto rb010/rb002 bullhorns. SORTED

3) a vintage 3ttt stem

1 inch quill, 25.4 clamp diameter SORTED

4) a 650c front wheel

non machined (no brake surface showing) grey/black rim wheel, not particularly bothered re the rest SORTED

5) concor saddle

Preferably white though can be recovered. SORTED

5) a vintage 3ttt stem

Yes and a stem but that's less of a priority now.

I have a rear track wheel with campy record hub, 27.2mm c record post and a 3ttt stem plus few more bits, pm sent

6) a vintage 3ttt stem

Got this seatpost for cheap. Interested?

Made some edits on the wanted list

I have this Nitto bullhorn cockpit setup, not exactly what you've asked for but similar so might be worth a look:

https://www.lfgss.com/conversations/255767/

pm'd

handlebars sorted

sorry i completely forgot about this and loving your moser build. Do you know the limit mark to clamp distance?

More edits made: does anyone have any nice quill stems.

more edits made

still looking for a seat post.

OK so update:

1) mavic open 4 CD / mavic open pro CD

a mavic open 4 CD or mavic open pro CD rim with braking surface still intact. Like the picture below.

2) track rear hub

any silver track hub, prefgerably campag/zeus... but more concerned re the price. (unknown hole spec AOY)

3) single toe straps

white single toe straps

Edits made.

Found out the hub will probably need 32 or 36 holes

Edits made

Thread Entering Hibernation Mode

Returns June 10

List being prepared:

1) 700c rim
a black, non machined (and braking surface intact) rim with probably 36 holes.

2) Track hubs
preferably a set or individual. Silver/chrome and simillar look and flange. Front: 32 holes, rear: unknown (depends on above) hole number.

3) Toe straps
Pair of white single preferably leather For now.

4) Airings/Pursuit bars or Track drops
Any cheap silver/chrome pursuit bars with deep drop and preferably narrow flat section. Potentially any cheap silver/chrome track drops.

5) Track ends
Unknown spec as of yet but preferably with a large depth of slit (don't know what its called).

Have a rear flip flop hub that might be of interest. PM if you'd like info

I think at the moment I'm still after a set. Getting them individually will kind of be a last resort. Sorry, I'll keep you in mind for then.

Can I just emphasise that I will only be able to make advances on these in two months time, so unless you're happy with me having long term dibs, I would look elsewhere.

Ok, no probs- I actually do have a (slightly mismatched) pair, but the front one happens to be 36h... Hope you find the bits you're after.

@walkmanman - Actually due to a change in plans I may be interested in that. I'll follow it up with a PM closer to June 10.

Revised List- still in hibernation

1) mavic open pro CD
a grey, non machined (and braking surface intact) mavic open pro CD rim with probably 36 holes (unknown AOY).

2) Track hub
Only need a silver/chrome rear track hub now. Preferably 1990s kind of time.

3) Toe straps
Pair of white single preferably leather For now.

4) Airings/Pursuit bars or Track drops
Any cheap silver/chrome pursuit bars with deep drop and preferably narrow flat section. Potentially any cheap silver/chrome track drops.

VO laminated leather toe straps used once black (sorry) excellent but won't get forty ala white straps..more practical... Cheers...Leon