Up for sale is my Cannondale commuter - a great made in the USA smooth welded aluminium number from I think 2004. Complete except for wheels.
I bought it as its a 20" c-t frame and as a 6 footer this should have been OK but with a 56cm c-c top tube its just too short. I'd recommend it for someone around the 5'9" mark. (pic shows seatpost at maximum height)
Frame itself is in very good condition with only a few marks on the top tube and one tiny tiny ding. I only rode on it for one month and I don't think it had had much use before. Forks are original Cannondale steel.
Chainset is old XT with a 6 month old Raceface DH 46t ring, BB is a UN53 that is still smooth.
Brakes are Cannondale rear, Avid front, one new set of pads and new cables inner and outer front and rear. Very well used Avid levers.
Chain is one month old and so is the superstar chain tensioner. Comes with an 18t sprocket that works fine with the chain.
Saddle has a bit of rust on the rails but is usable and a good shape.
Tyres are Marathons 26x1.5" and have plenty of life left in them.
I also have a front mudguard and basic screw on rear wheel you can have and an STX rear hub and DT spokes if you feel like building up a new rim.
100mm stem, 580mm bars and a very short 105mm headtube.
Sorry forgot to say Muswell Hill but might be able to strap it to the bag and ride down to town one day. PM sent.
Post a reply
Bold
Italics
Link
Image
List
Quote
code
Preview
Formatting Help
Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.
Tips:
Create headers by underlining text with ==== or ----
To *italicise* text put one asterisk each side of the word
To **bold** text put two asterisks each side of the word
Embed images by entering: ![](https://www.google.co.uk/images/srpr/logo4w.png) That's the hard one: exclamation, square brackets and then the URL to the image in brackets.
* Create lists by starting lines with asterisks
1. Create numbered lists by starting lines with a number and a dot
> Quote text by starting lines with >
Mention another user by @username
For syntax highlighting, surround the code block with three backticks:
```
Your code goes here
```
Just like Github, a blank line must precede a code block.
If you upload more than 5 files we will display all attachments as thumbnails.
Up for sale is my Cannondale commuter - a great made in the USA smooth welded aluminium number from I think 2004. Complete except for wheels.
I bought it as its a 20" c-t frame and as a 6 footer this should have been OK but with a 56cm c-c top tube its just too short. I'd recommend it for someone around the 5'9" mark. (pic shows seatpost at maximum height)
Frame itself is in very good condition with only a few marks on the top tube and one tiny tiny ding. I only rode on it for one month and I don't think it had had much use before. Forks are original Cannondale steel.
Chainset is old XT with a 6 month old Raceface DH 46t ring, BB is a UN53 that is still smooth.
Brakes are Cannondale rear, Avid front, one new set of pads and new cables inner and outer front and rear. Very well used Avid levers.
Chain is one month old and so is the superstar chain tensioner. Comes with an 18t sprocket that works fine with the chain.
Saddle has a bit of rust on the rails but is usable and a good shape.
Tyres are Marathons 26x1.5" and have plenty of life left in them.
I also have a front mudguard and basic screw on rear wheel you can have and an STX rear hub and DT spokes if you feel like building up a new rim.
100mm stem, 580mm bars and a very short 105mm headtube.
Click through photostream here, sorry for blurred photos but was getting dark. http://www.flickr.com/photos/38405768@N04/
£110