For Sale: van Herwerden (zullo) 55½cm

van Herwerden (zullo-chesini) complete bike

55½cm c/t
built by Zullo-Chesini for van Herwerden
Columbus tubing
only 50 kilometers driven!.....
panto in frame, front fork and headset,
bike and parts in outstanding condition
complete Exage equipment
cinelli stem, itm bars
SOLD
shipment outside EU possible, inform for rates

more photos
https://picasaweb.google.com/115332421835368732257/VanHerwerden?noredirect=1#

What's the length of the top-tube?

And I'm assuming it's running on clinchers (as opposed to tubulars)?

thanks for asking
top-tube 54cm
indeed clinchers....

No problem.
Just a little bit too small for me, but I have a (shorter) friend who might be interested. What's the standover height, and are pedals included?

top of top tube, to ground appr. 78½cm

price drop
GPB 370

PM'd

drop GBP 360 ....

reserved for APE

Sold

Nice one APE - I can't wait to see it.

Hi Willem

I'm enjoying the bike, I want to increase the gear ratio on the rear cassette to something like 14/24 or 14/28, the 14/19 is too high at the moment. Do you have any parts or can you make any suggestions.

You will need something like this:

http://www.ebay.co.uk/itm/CYCLE-REAR-CASSETTE-FREEWHEEL-SHIMANO-7-SPEED-14-to-28-GEAR-TZ-541-/181237472594?pt=UK_sportsleisure_cycling_bikeparts_SR&hash=item2a32985d52

Your rear spacing will be 126mm (probably) so 7-speed is high as you can go (I think), which should be ample anyway. Maybe check with the seller to make sure it's compatible.
The only other thing to then consider is whether or not the chain will need changing to accommodate the increased gear range (anybody?). Either way, it should be a fairly straightforward job.

This one comes with a chain!

http://www.ebay.co.uk/itm/Shimano-7-speed-freewheel-cycle-bike-block-screw-on-ratio-14-28-KMC-chain-/261251764175

The key is to establish the type of hub you're running (e.g.. screw-on).