For Sale: Aende 653 lo-pro frameset with 26" CDA front wheel

Nice Aende 653 Lo-Pro frame complete with the following

1.Mavic CX18 26" front wheel built onto a Campag Croce d' Aune front hub fitted with very nice condition Vittoria Cronometro CS tub
2.Nice Campag Chorus headset

Frame dimensions are as follows

126mm OLD
58cm Seat-tube
52cm Top-tube c2c directly down to headtube
Uses 27.2mm seatpost and has British BB thread

Nice condition with no dents/dings, no abvious rust either, just minor road rash present on bottom of downtube and very minor oxidisation around bottom of headtube, paint is still very nice too.

I'm after £250 posted for the lot or £230 for collection from either my work or home address (both South Midlands)

In addition I also have a very nice Campag Khamsin rear disc fitted with a Corsa CX tub that would go nicely with this available for an additional £250.

*NOW SOLD*

2 Attachments

some more pics

The string is to assist with getting a rear brake cable into the internal cable run

3 Attachments

Hi. Have you ever built this up and ridden it? If so how tall are you? Sizing theses things can be a nightmare...

Are you sure the tope tube is only 52cm? It looks either the same or longer length than the seat tube to me.

Also can you do a "effective horizontal TT" measurement?

Thanks.

Are you sure the tope tube is only 52cm? It looks either the same or longer length than the seat tube to me.

Also can you do a "effective horizontal TT" measurement?

Thanks.

I've just double checked and sure is 52cm top tube with an effective top tube @ about 51cm, I guess this is in order to compensate for the longer drop and tri bar stretch, this frame was built into a bike used with tri bars - infact it did a 55 minute 25 back in 1997!

The frame wasn't originally mine but belonged to a rider who was 5'10" with just short of 32" inseam if that helps with regard to sizing....it also ran with a 13cm stem.

On the expensive side, but my size I think. If it has horizontal dropouts I mightve gone for it.