For Sale: Cheap Roadie Junk Clearout - mostly £5

**Hello.

Here is some stuff I don't want, but you might want. And who am I to say that you can't want what I don't want? No-one! That's who.**

DSC_0112 by chctrlmt, on Flickr

DSC_0113 by chctrlmt, on Flickr

• Road Drop bars - 'ATAX FANCO ITALIA D352' 39.5cm - 25mm (french) clamp diameter, scratched/gluey. £5

• Road Drop bars - 'BELLERI ST ETIENNE' 42.5cm - 25mm (french) clamp diameter, scratched/gluey. £5

• Shimano 600 EX Pedals - PD-6207, Right pedal toe clip snapped at the tip, dust cap missing and bearing a bit tight/rough. Other is scuffed but O.K. £10

• Shimano Tricolor Levers - 6400 series, one is scuffed, otherwise very nice condition. $OLD

• Skewers - mismatched thumbnuts £FREE

• 'Kronos' Saddle - small nick on back. I found this very comfortable. $OLD

• Generic Seatpost - 27.2/300mm, brushed alu, so the scratches don't show that bad. $OLD

• Shimano Loose Bearing BB - 118mm, 36x24T, Square Taper. Good condition. £5

• Campagnolo Sealed BB - 111mm, 36X24F, Square Taper. Smooth. £5

• Shimano 600 Headset - 600EX Arabesque, Smooth action, lock nut slightly marred + missing 'lock' spacer. (Use the specialist wrench (as if) or wrap well with old tubes before using grips to tighten) £15

• Shimano 600 EX Driveside Crank Arm - FC-6207, threads and taper both fine. £3 $OLD

• Generic French Quill Stem - 25mm clamp, no plug expander nut. £5 or free with bars above

• Shimano MTB Freewheel - 7spd, 14-28t, used for 10m. £5

• Shimano MTB Freewheel - 7spd, 14-28t, unused, never installed. £5

• Maillard Freewheel - 6spd, 13-18t, no ramps, used but loads of life left. 2 prong tool removal (I have the tool for this I can include if you want it). £5

• Sachs Freewheel - LY-94, 7spd, 12-18t, no ramps, standard splined tool install. £5

• Alloy Pedals - generic, with reflectors. £5

• Shimano Chainring - SG, 53t, 130BCD, Worn but life left. £5 or both for £8 $OLD

• Shimano Chainring - SG, 42t, 130BCD, Loads of life left. £5 or both for £8 $OLD

• Quando/Weinmann Wheelset - Quando freewheel hubs on XR18 'aero' rims. 130/110 spaced. Quando Skewers. Both smooth enough. £15 the pair $OLD

More pics here

All for collection from Walthamstow/Brixton/The City if I happen to be there.
Post can be arranged for the little bits if need be.
Dibs followed by PM's please.

Safe

Dibs seat post and saddle. Could pick up from City. Or Brixton.

dibs crank arm, chain rings and levers :)

Cheers, saddle and post sold.

Hi
Would it be poss to send wheels and what would postage be.
Thanks vpug

Sorry mate, not up for shipping the wheels or bars.

Dibs wheels.

Hi, is the headset the cartidge bearing type, and what size the crown race (ISO or JSI)? Ta...

Hi, is the headset the cartidge bearing type, and what size the crown race (ISO or JSI)? Ta...

26.4 mm, so I.S.O.

Bearings are configured as in VeloBase article..

Forgot to mention its missing a keyed 'lock' washer. I think this is a generic part you can find quite easily, or use a drop of loctite.

2nd dibs wheels, and dibs the 600 levers

Umm can you put a fixed cog on that wheelset's rear wheel?

If so, a 3rd dibs to the wheels

Umm can you put a fixed cog on that wheelset's rear wheel?

If so, a 3rd dibs to the wheels

You can get the cog on there but there's no thread for a lock ring. There are ways around this problem but I wouldn't recommend them..

2nd dibs wheels, and dibs the 600 levers

Levers already dibsed for collection Sunday eve..

Dibs
Road Drop bars - 'ATAX FANCO ITALIA D352' 39.5cm - 25mm (french) clamp diameter, scratched/gluey. £5
and
Generic French Quill Stem - 25mm clamp, no plug expander nut. £5 or free with bars above

PMing now.

Cheers whatok,

undibs 3rd dibs on wheels then

BUMP since some people dropped out

buyer of the 600 crank arm didn't drop out did he?

Afraid not! sozzzzzz