An old racer that has an unknown heritage.
Solid straight frame that has a dink in the down tube where the front derailleur clamp has been overtightened at some point.
Unusual seat stays going into the seat clamp, 27.0mm
126 rear OLD
The chrome is good condition, that paint less so suffering cable and pump rub, and general wear.
Bottom bracket is English The right hand threads are not too good, only the last 2 or 3 holding. Left side is okay.
Comes with Galli headset that is a taper roller bearings
Centre to centre seat tube 555mm x 565mm top tube
I have used it as a geared and fixed with a 49 x 18 gearing, vertical rear dropout.
£90 can post. Location SE3
Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.
Tips:
Create headers by underlining text with ==== or ----
To *italicise* text put one asterisk each side of the word
To **bold** text put two asterisks each side of the word
Embed images by entering: ![](https://www.google.co.uk/images/srpr/logo4w.png) That's the hard one: exclamation, square brackets and then the URL to the image in brackets.
* Create lists by starting lines with asterisks
1. Create numbered lists by starting lines with a number and a dot
> Quote text by starting lines with >
Mention another user by @username
For syntax highlighting, surround the code block with three backticks:
```
Your code goes here
```
Just like Github, a blank line must precede a code block.
If you upload more than 5 files we will display all attachments as thumbnails.
An old racer that has an unknown heritage.
Solid straight frame that has a dink in the down tube where the front derailleur clamp has been overtightened at some point.
Unusual seat stays going into the seat clamp, 27.0mm
126 rear OLD
The chrome is good condition, that paint less so suffering cable and pump rub, and general wear.
Bottom bracket is English The right hand threads are not too good, only the last 2 or 3 holding. Left side is okay.
Comes with Galli headset that is a taper roller bearings
Centre to centre seat tube 555mm x 565mm top tube
I have used it as a geared and fixed with a 49 x 18 gearing, vertical rear dropout.
£90 can post. Location SE3
more on
https://picasaweb.google.com/motoaqua/BikeBlue?authkey=Gv1sRgCOXQzqHBhb2EIA#