-
• #2
The bike is pictured with a Corima carbon clincher 650c wheel. I may be persuaded to part with it and will only be offered to the buyer of the frame.
9 Attachments
-
• #3
the blue one the Riley J.D?
-
• #4
-
• #5
Ahhhhh it's huge. I am sorry.
-
• #6
works fine here- someone will be blessed with that on the track-special.
-
• #7
why so small?
-
• #8
Also the track wheels pictured in the Riley will be for sale. Campagnolo C-record aka sheriff star hubs 28 hole laced to Mavic (i think) Mach 2 CD tubular rims.
-
• #9
All of them are bling
-
• #10
JD if the Riley, Dave Marsh or Level dont sell and you still have any them in a few months time, I will almost certainly take one of them off your hands for my girlfriend. That being said they are both absolutely stunning so I doubt you'll have any trouble selling them.
-
• #11
Dat Orrell.
-
• #12
That level4 build if beautiful, good price too. I don't often wish I was shorter.
-
• #13
Always loved that Level Justin, the dave Marsh looks awesome in the flesh too.
-
• #14
Always loved that Level Justin, the dave Marsh looks awesome in the flesh too.
Thanks. I will be sad to see it go as I rode that frame to glory on the who's afraid of the tarck day! But it's not getting ridden since since I got the Burls!
-
• #15
Dat Orrell.
this. lovely in the flesh. good luck with the sale
-
• #16
Pm,d re riley
-
• #17
Would you sell the SLR on the Level4? And maybe the post...
-
• #18
Would you sell the SLR on the Level4? And maybe the post...
Sorry they have already been allocated to another bike project.
As all the parts as I said above. -
• #19
Ah I mis read this post..
The bike is pictured with a Corima carbon clincher 650c wheel. I may be persuaded to part with it and will only be offered to the buyer of the frame.
Thought the full bike was up, so was getting my vulture on.
-
• #20
Oooooof! Raising funds to pay for a certain groupset JD?! ;-)
-
• #21
Ah I mis read this post..
Thought the full bike was up, so was getting my vulture on.
Yes the front wheel maybe for sale as I have 2. All other parts as already stated have been allocated to other projects.
No harm in asking.
Cheers -
• #22
Oooooof! Raising funds to pay for a certain groupset JD?! ;-)
Nope sold your bike to pay for your groupset! Hahahahahaha!
-
• #23
I've had a few enquiries about shipping.
I will happily ship but please be aware some destinations have now become increasingly expensive. -
• #24
I will be in work allday if anyone wishes to pop by and view any of the above frames.
To those who have enquiried about shipping prices I will get back to you today.
-
• #25
Also the track wheels pictured in the Riley will be for sale. Campagnolo C-record aka sheriff star hubs 28 hole laced to Mavic (i think) Mach 2 CD tubular rims.
The above wheels have now been sold. Thankyou.
As the title says. 4 track frames for sale as im hoarding way too many and they should be ridden not hung on the wall like art.
1 Neil Orrell frame set made from Reynolds 531 Designer Select with the infamous triple triangle design and forks reynolds 531. Frame has been used on Manchester velodrome only. It has some paint chips but no dents or dings.( i can remove the headset cups if you wish as its incomplete)
Seat tube- ctc 54cm
Top Tube- ctc 54cm
seatpost 27.2
rear spacing-120mm
front spacing 100mm
bb-english thread
Not drilled for a brake!
Takes 700c wheels front and rear
Looking for (((((((((((((((((((((((((((Now SOLD))))))))))))))))))))
2- Chris Riley (Atom frame builder) custom made in 2003(last track frame he built). The frame is made up from deda down tube and an oval top tube with the seat tube forks etc being Reynolds 531 with 725 chain stays and headtube(with is 1inch ahead). It was made for pursuit and tuesday track league.
Frame has no dents or dings but has a couple of paint scrapes. It also has fitted 1inch cane creek headset that is clean and functions perfect.
Seat tube ctc 49cm (with a 5cm drop to the top tube)
Top tube ctc 52cm
seat post 27.2
bb-english thread
rear spacing 120mm
front spacing 100mm
Takes 700c wheels front and rear
Not drilled for a brake!
Looking for (((((((((((((now SOLD)))))))))
3- Dave Marsh track frame. Made from 531 tubing on the frame with a wishbone rear end and Columbus Aero fork blades and crown.
Ridden at many National track meets and a few masters by its original owner this is one tight track frame.
Seat tube ctc 49cm ctt 50cm
top tube ctc 53cm
Seat post 27.2mm
bb-english thread
Rear spacing 115mm(but i ran 120mm wheels with no problem)
front spacing 100mm
Takes 700c wheels front and rear
Not drilled for a brake
Looking for (((((((((((now SOLD thankyou))))))))
4- Level Four 1996 team issue pursuit frame. Thought to have been built by Terry Dolan(check the filet brazing) for Chris Boardmen sponsored/managed 90's cycling team(Yvonne McGregor was riding for Level Four when she broke the hour record in 1995). Its built from high end tubing believed to be 853 as thats was used to build Mcgregor's frame. (thanks to Horatio for the info/research)
There are no dents or dings but a few paint chips/scratches.
There is a Shimano Ultergra headset fitted which i will leave in as it works fine and i had it fitted new.
seat tube ctc 45cm ctt 46.5
top tube- 53cm
Wheel rear 700c
Wheel front 650c
Rear spacing 120mm
front spacing 100mm
BB-english thread
seat post 27.2mm
Not drilled for a brake!
Looking for ((((((((now sadly SOLD))))))))))) For frame/forks and headset (no other bits in the picture are for sale as they have already been sold or transfered to other projects)
Dibs followed by a PM please or it will be passed tot he next inline.
Collection/Viewing(highly recommended) Camden Town NW1
I do have a few more pictures of the frames. But didn't want to post all here but happy to email them.
24 Attachments