For Sale: Dave marsh Lopro frame, Miche cranks, bits and bobs.

GONE SOLD GONE SOLD GONE SOLD GONE SOLD GONE SOLD GONE SOLD GONE SOLD GONE SOLD GONE

I bought the frame and the cranks off pistoffski and both are beautiful and I wish I could keep them, however due to lack of time, money and motivation they have just sat in my room for months. I am just looking for the original Prices that I paid for them Which was (I THINK, not sure as original post has been edited, please correct me if you remember the original prices as I don't remember what I paid...) But:

Frame: £130

Cranks: £60 £55

Here are the specs, straight from original post.

" Dave Marsh Low Profile TT Frame (700x700c)
Fitted with a Campagnolo Chorus 1" Headset
Frame Sizing: 56cm Seat-tube (CTC) / 57cm Seat-tube (CTT) / 54cm Top-tube (CTC)
For 700c size wheels front and rear
125mm rear spacing / 100mm front spacing
Campagnolo drilled track ends
Shimano fork dropouts
Reynolds tubing - type unknown - very light
Frame is straight
One noticeable dent in the NDS down-tube from the bike falling on one side whilst in storage.
British BB threading / For 27.2mm Seatpost / 1" Quill Stem
Great restoration project - Or ride it as is."

The dent IS noticeable and about the size of half a thumb. However the steel is thick and other than the paint being chipped around the dent it is purely cosmetic. Could easily be rolled/filled at a welder near you!
Dent: http://www.flickr.com/photos/60206280@N05/6888718214/in/photostream (light makes it looks worse than it actually is in this photo...)
and: http://www.flickr.com/photos/60206280@N05/6888718110/in/photostream

And the cranks:

***SOLDDDDDD

"Miche Primato Pista Crank Set
Stronglight 51t Chain-ring
Excellent condition - Hardly used
To fit ISO Taper BB
135 BCD
165mm Crank Arm length
Standard pedal threading"

Also selling: Old raleigh 1" quill stem without a clamp bolt, bit scratched but solid- £4

Schwalbe 26"x1.50-2.50 Schrader valve inner tube w/ box. - £3

Thanks,
Jack

Love that frame.. How would they have used it geared? Soem kind of detachable derailleur hanger? Or is this puppykilled and hanger chopped off?

pm'd re frame

I believe that the dropouts were replaced with these lovely drilled campag ones (along with the hanger), although I could well be wrong. Pistoff probably knows...

2nd dibs on frame

Primitive has pulled out.

undibs

Dibs

I've got an almost identical one, Dave marsh built 700c lopro. Mine's 753 with campagnolo road dropouts. No front mech hangar and has the Cinelli bottom bracket fairing/ spoiler type gizmo. I'd be surprised if this wasn't of a similar ilk. Nice, and good price too.

2nd 2nd dibs.

You can haz post?

is it possible to post frame to saint-Petersburg, Russia or Vilnius, Lithuania?

Guys I've PM'd and most likely picking up either tomorrow or wednesday

Just to be clear, I dibsd the frame but not the cranks - they're still available. Therefore.....bump