Wanted: Cinelli 1A expander bung & bolt

I have a 1A but not expander bung & bolt - does anybody have them in their spares box or is able to point me in the right direction to find them?

Cheers

Go to Herne Hill jumble on the 1st.

you can use a seat binder bolt (the bolt that goes through the frame) and a recess brake bolt iirc. Looks more like a 1E but those smooth 1A bolts are nigh on impossible to find....

It's the expander bung / bolt I'm after (the parts that wedge the stem inside the steerer) rather than the binder bolt for the clamp.

I've sent campyoldy an email to see if they have any

I have a 1a for ive been meaning to sell, you can borrow the bit you need until yours arrives if you want?

Oops! Oh well handy hint should you lose the other bolt....

@jogger - that's very kind of you but thankfully it's for my nice weather bike so there's no immediate hurry. Much appreciated though.

If you find the bolt on its own, let me know as I have the conical nut laying around in my parts bin.

^thanks a lot

somebody recently was seling/freecycling a bolt and expander, do a search in last 5/7 pages.

Cheers for the heads up. Haven't had any luck finding the thread yet but will keep digging!

it was a stem, this nut/expander combo and one more thing for sale. thats all I remember.

oh, and all the items were shot together on a bed but I guess its not too much of help haha

you mean this
http://www.lfgss.com/thread77538.html

^!!!!

nitto will fit?

the recess hole atop my nitto technomic is 1.3 cm wide
the hole atop my 1a is 1.2cm wide

nitto jag may be different, and my 1a is 80s not reissue

The nitto stems use an expander wedge - my stem needs a conical bung sadly

Sorted - many thanks to mdcc_tester and paramounted.

If anybody dredges this in the future with the same problem, Campyoldy stock

Expander bolt & cone for stem 7mm diameter, 184mm long with 60mm of thread, 10mm hex head; not a thrilling item but increasingly hard to find when you want one £6.00