I'm fitting an italian campag record cartridge BB.
I tried fitting it first of all with grease, and found that the spindle had some slight resctricted motion after tightening the non drive side fully. The campag manual mentions this might happen, and if so to apply loctite and tighten less (the non-drive side).
So I've degreased it, applied loctite 243, and tightened till just befor ethe resticted motion, but it seems quite far from fully tight; about 2 revolutions.
Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.
Tips:
Create headers by underlining text with ==== or ----
To *italicise* text put one asterisk each side of the word
To **bold** text put two asterisks each side of the word
Embed images by entering: ![](https://www.google.co.uk/images/srpr/logo4w.png) That's the hard one: exclamation, square brackets and then the URL to the image in brackets.
* Create lists by starting lines with asterisks
1. Create numbered lists by starting lines with a number and a dot
> Quote text by starting lines with >
Mention another user by @username
For syntax highlighting, surround the code block with three backticks:
```
Your code goes here
```
Just like Github, a blank line must precede a code block.
If you upload more than 5 files we will display all attachments as thumbnails.
I'm fitting an italian campag record cartridge BB.
I tried fitting it first of all with grease, and found that the spindle had some slight resctricted motion after tightening the non drive side fully. The campag manual mentions this might happen, and if so to apply loctite and tighten less (the non-drive side).
So I've degreased it, applied loctite 243, and tightened till just befor ethe resticted motion, but it seems quite far from fully tight; about 2 revolutions.
Does this seem reasonable?
Thanks for any advice.