For Sale: Bob Jackson Frame - Miche Cranks + Road/ track parts

Hello - Right, I'm planning to quit work and get my thumb to the road - so need to clear out the spare parts I have aquired over the last year.

Incidentally I'll be looking for a Touring frame that will take a 130mm rear hub if anyone has anything in 57 squared to swap or sell!

1) Bob Jackson frame - excellent frame that i have ridden for the last two years, its quite scratched in places, with lots of paint chips, so could probably do with a re-spray at some point. I suspect it is Reynolds tubing but can't prove that - it has Campagnolo dropouts, a shimano BB and headset (can't remember the make) - both work. I rode this fixed and geared - its good as a fixed gear frame as it does not have any braze ons for gear/ brake cables - you just need to ignore the gear hangar and its braze-on less. Top tube 57 (c-c) x Seat Tube 59 (c-t) (I just checked) 126mm rear hub, I had this squashed to 120mm and then out to 130mm - there is a rattle in the fork, like a tiny piece of metal is floating around in it? I have no idea how it could have got in there?- SOLD

2) Miche Primato Cranks - used but excellent condition - I'm sure the guy I bought it off told me the ring was new - the arms have some rubbbing on them to show they have been used lightly - £50 - sold pending payment

3) Cinelli Vai seat post - 27.2 - inserted but never ridden - £15

4) Cinelli Vai seat post - 31.6 - new and unused - £15

5) Shimano 5600 105 Black 10 Speed Braze on Front Mech - £15

6) Benotto engraved stem - SOLD

7) Nitto stem - 90mm some insertion marks, though not visible when inserted all the way into the frame -** SOLD**

8) Mavic Espoir Jersey - Large, but a very small large, its like a normal medium - new and unused, still has tag bearing the £50 price (I had a voucher for Phil Corley Cycles) - £30

9) Campagnolo wheel - I bought this from a porly labelled Ebay advert, which just said 'fixie wheel - very good condition' its neither - it takes a screw on free hub and is very used - still, its a Campagnolo Lambada Strada rim - maybe it could be used as single speed? who knows - I just don't want it - £15

All items are at my house in Newington Green - collection would be preffered, as I couldn't get to the post office easily around work - but I will post if it comes to it.

All prices are open to negotiation - with the new pieces they should be cheaper than the cheapest ones available online, the frame and cranks are based on prices on Ebay - if anyone thinks the prices are off then just say and I'll re-calculate them.

I can be in most nights from 6!

I'm pretty sure the pictures I'm trying to upload will be there when this is put up onto the forum - if they dont upload I'll stick them up later!

8 Attachments

Dibs on 7) Nitto stem - 90mm some insertion marks, though not visible when inserted all the way into the frame - £15

dibs on the frame

Dibs jackson and nitto stem

cheap for a BJ!

Shit!

2nd dibs on frame

Will you split the cans of lager?

Dibs nitto - can pick up tomorrow...

Curse my slow mobile connection. Peh

the bit of metal floating around is probably just some flux, it's nothing to worry about.

shit i need that bob jackson

#cry 3rd dibs.

damn too slow!

Is the Miche crank set an earlier model of the Primato Advanced ones? What's the BCD and chain ring size?
Ta.

dibs Benotto stem Pm'd

Right - cheers for the interest!

I have 'Kidd track' for the frame, wayfarer80 possibly for the stem - PM'd both back and waiting to confirm collection - if either pulls out then I'll let the next person in line know!

CamdenStrangler - I wasn't too sure about the price, but considering the price I bought the complete bike, use it has, and the number of piant chips on it I'd say it seems about right - I have bought a number of things on here that would be much more on Ebay, so it all seems to even out in the end.

Snowy - I'll get those cans in the post for you now.

everything else is still for sale!

dare i say 4th dibs on the bob?

2nd dibs on the benotto stem

I have had a number of PM's with questions about various parts - I'm going to reply to these tonight now! I'll be at work all day so won't have acess to LFGSS!

Joel

Dibs on the cranks then for now. :)

2nd dibs on miche cranks
Pm Sent

Just updated the thread - I have gone slightly against the 'dibbing' ettiquete in that I'm now selling the Nitto stem with the frame - I'm doing this purely for my own convenience and that I'm far too busy with work to arraneg too many seperate meeting with people.

I should have mentioned before, but its first to arrange a suitable pick up that gets the item!
I won't keep endlessly bumping this thread, I'll put the things on Ebay Sunday if not gone by then - I'll make sure that the thread is updated though so if you see it, and it looks available, it probably is!

Cheers - Joel

I'm going to pass on the cranks. Undibs and PMed.

There's no way that Nitto stem is 90mm . . . 50mm possibly.

has the benotto stem gone?