Wanted: MTB parts, shifters, seat post, front mech, cassette

Good morning all, let me know what you have got, some bits I am trying to source, ebay pisses me off!

Inline seat post: Long, 27.2 mm, (not thompson, too expensive :()

Front mech: Deore - XT level, top pull compatible and 28.6 clamp size, although I have some shims off of another front mech, so not really a problem if it's a 31.whatever mm.

Shifters: Deore - XT preferably a pair but just the RH will do as I have a old LH hanging around.

Cassette: Off chance of a lightly used / brand new cassette, 34 teeth big cog, sram or shimano, only really interested in a virtually brand new one, bought in error, swapped to SS e.t.c.

cheeky PM bump!

and lastly cheecky evening bump

I have no room- borrow my Cannondale.

I Have xtr rear mech xtr RH shifter and a shimano 9 s cassette, I will have to have a look at the cassette for the sproket sizes .
all in near new condition.

regards

Cassette is CS M770 11-32t , RH shifter is XTR M970 , rear mech is M970,
Also got a Saint Single chain ring crank with a e- thirteen bash guard if your are interested?

Regards

Thanks mrblue but xtr is out of my range.

Tommy I have a used Deore front mech you could have for free, if you dont find anything better (at least I'm pretty sure I have one). It can be run both top or bottom pull, but need MTN style clearance to the back wheel (why I replaced it with a bottom pull only one). Let me know and I'll chuck it in the post. I have the Deore shifters too actually.

What does MTN clearance mean? It is for the slowly forming on one 29er build, so I presume clearance will be tighter than a 26er but more than a road bike. I'll take the shifteres too, how much would you like for them?

What does MTN clearance mean? It is for the slowly forming on one 29er build, so I presume clearance will be tighter than a 26er but more than a road bike. I'll take the shifteres too, how much would you like for them?

Probably bad terminology on my part. But I tried mounting the front mech on a cyclocross frame, and the tyre rubbed the swing arm mechanism. Wont be an issue on the on-one. If I remember rightly the mech is in decent nick, but the shifters are dirty on the inside of the window that shows what gear you're in (might just be one of them).

PM me your address, and I'll wack it all in the post. You'll be doing me a favour getting some use out of it, as I cant see myself using it or throwing it away.