Wanted: Quill stem, 26.4 clamp

hello
im looking for a quill stem, 90mm, 26.4 clamp to fit my cinelli tempo bars
anyone got anything suitable?

joe

Have you got any stem at all at the moment? Are you sure you need 90mm?

SJS actually listed this one for you - GB Biba Road Quill Stem to fit 26.4 mm Clamp - Suit Old Cinelli 110 mm -18 Deg

You'd need to find Cinelli XA or 1A

im using a tiny stem on my bike at the moment.
but no, im not sure i need 90mm, ridden a lot on my mates bike with a 90mm nitto pearl and it feels nice but i must admit i havent tried anything else

Go there - http://www.competitivecyclist.com/
Measure everything and see.

I swapped for a longer stem on the lo-pro, because the top tube was too short for me.

im using a tiny stem on my bike at the moment.
but no, im not sure i need 90mm, ridden a lot on my mates bike with a 90mm nitto pearl and it feels nice but i must admit i havent tried anything else

your mate bike may have a different top tube length that's perhaps shorter or longer than your, which also affect the reach as well.

A Nitto Pearl 9 is realistically 100mm, not 90mm as expected (Nitto measure it differently).

yeah i know :)
and thanks for reminding me of the whole nitto thing, i read that a couple of days ago but i had forgotten

I've got a nice looking Cinelli 1r thats 95mm center to center as best I can measure it. Only problem is the wedge part has broken so you'd need to find one of them.

Joe, go for it. I've got a spare wedge. Is it the diagonal kinda wedge or a plunger type?