Suzue 1A Rear Hub cones

Posted on Sat 21st, November 2009

• #1

cheekysnaker

I have the hub as mentioned in the title, and the cones have become ridiculously pitted. the hub itself etc is fine, it is just the cone I need replacing.

Can these cones be found to fit the threading on the axel! Does anyone have any spares?

I am specifically after the small drive side cone nut.

Thanks.
• #2

scherrit

Not too sure about the threading standard but most likely shimano compatible, so go to your local friendly bike shop and ask to poke through their "wrecked hubs" drawer- you will prolly find cones to suit.
Good luck,
Scherrit.
www.thebikewhisperer.co.uk
• #3

cheekysnaker

thanks for the response, but have already tried all the bike shops around, the cone size is very specific and impossible to find!
• #4

DFP

The suzue hub I have has different size cones/bearings on each side. Bear that in mind.
• #5

Dylan

buy an 'normal' axle and refit with some 'proper' cones ??
• #6

Dylan

in fact, i have a front DA axle sitting right here, minus the cones.
• #7

Dylan

ahh yours is a rear, bad luck.

Post a reply
- Bold
- Italics
- Link
- Image
- List
- Quote
- code
- Preview
Formatting Help

Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.

Tips:

Create headers by underlining text with ==== or ----

To *italicise* text put one asterisk each side of the word

To **bold** text put two asterisks each side of the word

Embed images by entering:
![](https://www.google.co.uk/images/srpr/logo4w.png)
That's the hard one: exclamation, square brackets and then the URL to the image in brackets.

* Create lists by starting lines with asterisks

1. Create numbered lists by starting lines with a number and a dot

> Quote text by starting lines with >

Mention another user by @username

For syntax highlighting, surround the code block with three backticks:

```
Your code goes here
```
Just like Github, a blank line must precede a code block.

If you upload more than 5 files we will display all attachments as thumbnails.

For a full reference visit the Markdown syntax.