-
• #2
Wheel(s) out of true?
Forks are bent?
Front wheel not aligned with stem?
Poor balance?
-
• #3
Every time I had this issue with a car I owned, the answer was, invariably, 'check your alignment.'
-
• #4
wheels fine, forks could be a possiblity from a crash. . .
-
• #5
how impossible if it bending steel forks back?
-
• #6
Headset too tight?
-
• #7
how impossible if it bending steel forks back?
Give it a try and find out. :)
-
• #8
Headset too tight?
+1, didn't think of that.
-
• #9
Headset too tight?
hmm possible, will definatley look into that, thanks everyone, very helpful :D shall try and sort it tommorrow and will report back :) -
• #10
if it swerves to the right, it usually indicates that either A] frame is bent or B] forks are bent or C] both are bent.
it's better if it B] cos its easier to correct.
in any case, you will need to see a bike shop with "proper" mechanic that can identify the problem, and then fix it appropriately.
unless that is you want to try finding out yourself what is bent.... Sheldon has a rough and ready method for gauging the straightness of a frame... and you only need a long piece of string to do it. as for fixing it yourself, hmm, that's a bit difficult without a jig of some sort
-
• #11
Sometimes it can be as simple as a brake cable pulling your handlebars one way or another, this is easy to check.
It could also be due to rear wheel being off centre - either for a dishing/spacing issue or a bent frame.
-
• #12
Sometimes it can be as simple as a brake cable pulling your handlebars one way or another, this is easy to check.
It could also be due to rear wheel being off centre - either for a dishing/spacing issue or a bent frame.
i know for a fact its not the latter as the rear wheel is centered and dished correctly, i think it may be the brake cable going to the front brake, im going to have a fiddle with it after i have woken up properly lol -
• #13
Is it racist?
-
• #14
Your bike is gay. Just accept it. You can't force a gay bike to go straight.
-
• #15
lol
-
• #16
if it swerves to the right, it usually indicates that either A] frame is bent or B] forks are bent or C] both are bent.
it's better if it B] cos its easier to correct.
in any case, you will need to see a bike shop with "proper" mechanic that can identify the problem, and then fix it appropriately.
unless that is you want to try finding out yourself what is bent.... Sheldon has a rough and ready method for gauging the straightness of a frame... and you only need a long piece of string to do it. as for fixing it yourself, hmm, that's a bit difficult without a jig of some sort
whack the ends of your forks in a grid and give them a good kickin
-
• #17
whack the ends of your forks in a grid and give them a good kickin
sound, appropriate, measured advice. couldn't ask for more.
-
• #18
do you dress to the right?
-
• #19
-
• #20
You could bend that back no problem.
-
• #21
how should i go about it?
-
• #23
i read that and now realise it offers no advice on how to practically do it but does give hope
-
• #24
doesnt really explain that well, so i just sort of clamp it and then pull it?
-
• #25
Your pic doesn't indicate that the forks are bent. You've just drawn two random lines and seen that they don't lie in the middle of the forks?
Hey another problem. . . :(
when im riding my bike it wants to go to the right i mean if i try and do no hands it will veer off to the right, any ideas, the only thing i can think off is the bar end brake lever is on the right and the cable points to the right :S