Dust caps for miche single sided ss hub

Posted on Fri 10th, July 2009

• #1

ile

Hi all,
I am trying to find some dust caps for the miche rear hub. the single side small flange one.
does anyone have any idea where to look for that or which other dust caps should be compatible?
any info highly appreciated :-)
• #2

stuckcog

Hi I have this problem too, no luck so far. I still have the old dust cap but it is damaged (it comes loose sometimes and also the seal around the hub cone is not so good) so I am going to try glueing a washer with a 16mm hole onto the dustcap. As the cone on this side is 15mm in diameter this should give a gap of 0.5mm around the cone, should be enough I reckon.
• #3

stuckcog

sorry, just to add for more info, my problem is with a suzue rear hub, which has an axle 9.5mm wide and 26 tpi so other brands (e.g. shimano axles are usually 10mm wide) won't fit on it, depending on your axle diameter and screw pattern you may be able to use shimano stuff.

Post a reply
- Bold
- Italics
- Link
- Image
- List
- Quote
- code
- Preview
Formatting Help

Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.

Tips:

Create headers by underlining text with ==== or ----

To *italicise* text put one asterisk each side of the word

To **bold** text put two asterisks each side of the word

Embed images by entering:
![](https://www.google.co.uk/images/srpr/logo4w.png)
That's the hard one: exclamation, square brackets and then the URL to the image in brackets.

* Create lists by starting lines with asterisks

1. Create numbered lists by starting lines with a number and a dot

> Quote text by starting lines with >

Mention another user by @username

For syntax highlighting, surround the code block with three backticks:

```
Your code goes here
```
Just like Github, a blank line must precede a code block.

If you upload more than 5 files we will display all attachments as thumbnails.

For a full reference visit the Markdown syntax.