Wanted: Front caliper, bolt fitting

hi there, looking for a bolt fitting front brake caliper for an old claud butler frame with 27" wheels. anyone got anything like this?

Drill the backside of the front fork with 8mm drill and you can use a "standard" brake with allen-key nut.
Or do I misunderstand ?

i'd rather not drill the fork, but thanks for the advice.

Clear ;-)

I have a pair of 1979 weinmann vainqueur centre pull brakes (one is model 610 the other is 750) of an old Claud Butler with 27" wheels. Complete with straddle cables, yokes and a front cable hanger (and levers if needed). let me know if this is of any use.

hi paul, how much you looking for without the levers? and would you sell just the front?

cheers,

steven

Happy just to sell the front, without lever. Does £5 sound OK? Do you want the cable hanger as well?

Is it the 610 or the 750 you're after? I would assume it's the 610 (that's what was on the front of my daughter's CB with the original 27" wheel) but let me know.

Paul

hey paul, 5 pounds sounds good with the cable hanger. I'll take the 610 but not sure what the difference is. You happy to post to glasgow, i,ll pay the postage. Cheers mate,

Happy just to sell the front, without lever. Does £5 sound OK? Do you want the cable hanger as well?

Is it the 610 or the 750 you're after? I would assume it's the 610 (that's what was on the front of my daughter's CB with the original 27" wheel) but let me know.

Paul

PM on its way.