Headset problem

Need a new headset - 1" threaded for an Argos time trial frame I have. The problem I have is that the current fucked headset has a 32mm stack height (according to my LBS) and they tell me that they are going to struggle to get hold of one of these, and have suggested I look online.

I can't seem to find anything with such a short stack height. There are plenty of dura ace headsets around, but these have a 37.6mm stack height.

Will this work, or is my fork steerer going to be too short?

If I really do need to find a 32mm stack height to replace, does anyone know of any solutions - I'd rather not have to resort to getting something out of the US.

Thanks, and apologies for my ignorance.

Willo

http://www.sjscycles.co.uk/src/froogle/product-Tange-Tange-Passage-1-Inch-Shallow-Steel-Cup-Threaded-Headset--30.2-mm-Stack-Height-9225.htm

Described as a "durable, budget headset", so not sure if that's quite what you had in mind...

I'd seen that - ideally I'm after something of better quality. But I suppose if there are no alternatives, it will have to do.

I've been doing some googling - will a Chris King Grip Nut do the trick?

http://www.totalcycling.com/index.php/product/hs_chris_king_gripnut.html?action=currency&id=GBP

It's a fair bit of money to spend if it's going to be wrong...

Just an idea, it will not give you much but if you get you head tube faced that may give you a mm or so to allow you to use a 33 mm stack height headset allowing you to get away with the CK posted by willo

yea i think you might just be able to get a away with the GripNut Chris King headset, go to your local LBS and ask them what they reckon