-
• #2
I don't know either mate - I just screwed the nuts back on like you said. Haven't fallen off yet touch wood
-
• #3
yeah I though you just compressed it back on with the nut, and then just check them and tighten them if they feel loose after riding on them. surely?
-
• #4
thats what i thought, but it almost seems too simple. considering how hard it way to get them off with the puller i thought there was more to the process of putten them back on.
-
• #5
no, you just do the nut up. tight.
-
• #6
Thanks jim:D
-
• #7
re-read the post. haha
i recently removed my cranks using this park tool: http://www.parktool.com/products/det...6&item=CCP%2D2
i have the square taper type of spindle with a threaded rod on the end where a nut sits to hold the cranks.
i dont really understand how i re-install the cranks back onto the spindle. how do i press it back onto the tapered spindle?
im guessing i dont just push it on tight and do up the nut, as i had to use quite a bit of pressure to undo them with the removeing tool.
ive done some searches but i only ever find info on how to remove the cranks.