-
• #2
That sounds right to me. If you go to sjs website they have diagrams. In reality the taper is barely visible but you can feel it if you run down the spoke with your fingers.
-
• #3
yes, ved is correct.
-
• #4
2.0mm - 1.8mm = 0.2mm = almost nothing to see here
-
• #5
like this:
-
• #6
double butted spokes, like tubing, is narrower in middle
Sorry, but an idiotic question here.
I just got some spokes in the post. From diagrams/descriptions on the net I got the impression that the spokes were 2.0mm at each end, with a very visible narrower middle section (1.8mm)
The ones I have, seem to have a very slight taper, with a thicker end and a narrower end. It might just be my eyes, but does this sound like the right kinda spoke?
Thanks