Wanted: 70s Road stuff

Front Mech Campagnolo band-on
Rear Mech Campagnolo suitable for 7 speed
27" rims shiny shiny
road bars and stem
brakes, levers
umm pedals too.
27.2 seat post

and here's the joke-of-a-long shot...
a Phil Wood steel-body front hub, low-flange.

The kitchen sink.

I know, its a big list.

£$€ MONEY FOR GOOD STUFF!

cheers
Skullbags

What diameter is the seat tube that this front mech is going to band on to? I've got a few old Campag mechs at home...

Platini:

It seems a little large, I measured it as 90mm around which equals 28.6 diameter.
Any good?

I'll measure them tonight and let you know in the morning.

matt has a pair of 27 rims he took off a claud butler... i started polishing them up, would come up a treat with a bit of elbow grease....

matt has a pair of 27 rims he took off a claud butler... i started polishing them up, would come up a treat with a bit of elbow grease....

Oh shit yeah, sheep, I already told him I'd have them. Doh.

Ta

Platini:

It seems a little large, I measured it as 90mm around which equals 28.6 diameter.
Any good?

I've found an Ultegra one that seems to be the right size. PM me your address and I'll post it to you if you want it.

I have a front band-on campag mech.

Its really a huge coincidence that you want it,

when I first had the "exciting" idea to build a fixed, I got old of a nice old raleigh 10speed and tore it off.

I think its in the exact same place as I left it, with all the washers for the shifter scattered about : )

Ill see if I can find it all for ya.

I also have some aluminium drop bars used nothing fancy, another set of the same that have been "chopped", and also a set of totally NOS, steel drop bars & stem in chrome. Fitted with levers & original hard tape. - Brand spanking NOS - but super heavy, true 70's though.

Oh and 2 decent short road stems too. 1" quill.

Im in birmingham. The alloy bars & mech should be easy to post. But wed have to meet up for anything else.