Wanted: Drill bits to borrow for sunday morning!

me and object are having a mallet making sesh on sunday morning, and we need some drill bits:

1/2'' counter sink
5/16''
7/64''

can anyone hook us up? guess it might not have to be exactly the above ones but something close would be cool!

Good call ;]

metric? my converting is shit....

are drill bits measured in mm?

were not stuck in america like chris

use google!
1.27 cm counter sink
woops its not 5/6" but 5/16!
.27cm

other wise they all check out (cm to mm conversion)

use google!
1.27 cm counter sink
2.1167cm
.27cm

felt lazy FU*K thats big... you need one of those circle cutter jobs.

i just cut 'n pasted from the guide i was reading, which was written by an american. sorry.

um, google tells me:

12.7 mm counter sink
7.9 mm
2.5 mm

also, i need a reeeeeeeeeeally small drill bit for a non bike related project, say 1mm or smaller?

felt lazy FU*K thats big... you need one of those circle cutter jobs.

yeah, though apparently a good way of making them is to cut the whole smaller than you need and heat the pole so it kind of melts in? thus, we might not need it quite as big.

its defo above 2.77mm for the last one.
amended earlier post.
yeah and 7.9375 mm.

1" = 25.4mm
Thus 1/2" is about 13mm
5/16 about 8mm
and 7/64 about 3mm

@ eyebrows, 'your' converter is wrong

you do realise my measurements are in cm right?

except for the 2.77 thingy, which confusingly is in mm

i just cut 'n pasted from the guide i was reading, which was written by an american. sorry.

um, google tells me:

12.7 mm counter sink
7.9 mm
2.5 mm

also, i need a reeeeeeeeeeally small drill bit for a non bike related project, say 1mm or smaller?

dont know if im gonna be sundaying but i have really small drill bits... and tiny hand drill... which you can borrow... if you use near me. 1mm and less

who works in cm

you guys could argue with a fence post!

• me.
  
  

:)

and if your thinking about getting drill bits...

http://www.screwfix.com

shinscar, where abouts are you based?

londons famous whitechapel

PM on the way then!

dunno about the bit sizes, but my drill was sacrificed for mallet production. its only somewhat functioning now (will hold only the largest bit). in any case, you're welcome to use it (and the remaining bits) if you can fetch it from trampsparadise/agata/germanmichael, since it was last seen at their house...