Singlespeed Conversion, Help Needed Please

Guys,

    could you help me please? I have an old 70s Bianchi racer that I would like to convert to singlespeed. I would like to retain as much of the original bike as poss. Can I get a conversion kit that would fit onto the freehub thats on the bike now? At the moment there is a 5 speed one on there but I would like to keep the old 27x11/4 wheel if poss. Also what number tooth rear ring would you recommend? Thanks in advance :-)

you can screw on a freewheel in place of the freehub cassete, I'd expect.

but the wheel would need re-dishing.

you could ghetto speed it, leave all the cogs and chose one that gives a straight chain line.

not a bad idea, but they do have a tendency to skip, unless you run the chain tight

you can screw on a freewheel in place of the freehub cassete, I'd expect.

but the wheel would need re-dishing.

By how much and what does re-dishing do

he wants to keep it original, would allow him to put the gears back on, possibly kill less puppies, but i make no promises

Redishing centres the rim over the hub.

will people please get sheldoned up

Its either get a conversion kit for the cassette hub .................... very easy to do

Or................ Remove the sprocket block
Replace the block with a 1/8th or 3/32 freewheel 16-17-18-19-T
....................Respace to align with the chainring
& then ..................Redish

*you can screw on a freewheel in place of the freehub cassete, I'd expect.*

Never ask RPM to do a wheel for you, not if he believes a cassette hub can be replaced with a screw on freewheel

Is it a screw on sprocket block??

its unusual to see 5 speed cassettes

I meant a screw on cassette you pedant.

I meant a screw on cassette you pedant.

I wish people would get Sheldoned up LOLOLOLOL

I wish people would get Sheldoned up LOLOLOLOL

Why are you being a twat?

go eat a bag of dicks you twat

Freewheels and Cassette Freehubs
[INDENT]They're NOT the same!

[/INDENT]

Why are you offensive ??

it's true , they aint the same.

I used the wrong terminology, you know what I meant. big deal.

you're still a dick

No its quite clear that you are the DICK

chill the fuck out guys.
I suggest watching Dr. Stranglove.
or if you prefer: Dr. Merkwürdigeliebe

Cnutswtf?!

I am very rarely rude or offensive but you are.... frequently.
If you are going to give advice to a newbie try to use the correct terms to describe the parts of the wheel/bike he will need to research about before he converts, otherwise he will waste a lot of time and effort before he realises you are in fact talking out of your arse. Now run along and check out the captains web site bicycle glossary again and again until you get it right

I am very rarely rude or offensive but you are.... frequently.
If you are going to give advice to a newbie try to use the correct terms to describe the parts of the wheel/bike he will need to research about before he converts, otherwise he will waste a lot of time and effort before he realises you are in fact talking out of your arse. Now run along and check out the captains web site bicycle glossary again and again until you get it right

Mate, shut up.

First of all, how do you know he's a 'newbie'? He's might have been riding a bike a hell of a lot longer than you for all you know. You talk about not being rude.

Second of all, re-read the man's post. All he says is that he has a freehub, and it has a 5-speed cassette on it. How do you know it's not a screw-on cassette?

Also, of course you wouldn't add spacers and redish.

You're blatantly trying to start an argument here.

No I am not trying to start an argument
and I was not rude !!

"Newbie" as in new to the forum and new to converting a bike

I stand totally with RPM being incorrect in his advice and description

You obviously know your stuff so when was the last time you saw a 5 speed "FREEHUB" because my friend they are like rocking horse shit

Can I get a conversion kit that would fit onto the freehub thats on the bike now? At the moment there is a 5 speed one on there but I would like to keep the old 27x11/4 wheel if poss.

Well, we're only going on what he says. Yeah they may be rare, but it's what he says he has.

However this is really arguing semantics. i'd recommend that he just takes the derailleur off and runs the best combination of chainring/sprocket that gives him the best chainline.

Yeah the best apology I'll get ..........you are a complete CNUT