Polo Bikes

Is that what you've been using for a while now? The 32 spoke only factor has played on my mind for a bit, but then again I'm using Mavic D521 rims which err on the weighty side of the strength vs weight trade off.

Been using Echo TR hubs, similar but 201g.

If only they had more spokes.

Tarty don't seem to stock 36H.

Tensile 135mm "fixed" rear, inc bolts,182.5g plus WI @ 177g
360g
£50 http://www.tartybikes.co.uk/135mm_fixed_hubs/tensile_nondisc_rear/c21p12274.html

Are these the ones Chan had? His wouldn't clamp hard enough on rear and kept slipping. It says their designed to be used with snail cams which are a type of chain tensioner

Im thinking of changing to a threaded hub and decent freewheel. Apart from the Hope pro II I used to use the other free hubs i'v used skip every now and then

Are these the ones Chan had? His wouldn't clamp hard enough on rear and kept slipping. It says their designed to be used with snail cams which are a type of chain tensioner

Chan had Echo TR like mine, and I bought them when he switched back to Paul hubs; the bolts are fine on bare steel but they don't grip fresh powdercoat very well. The Tensile track hubs I bought came with serrated domes under the bolts so if these use the same ones there should be no slip.

And the best part of it....homemade clearance....

what frame and size is that camilio?

what frame and size is that camilio?

Its a 53 Volume Cutter v.2, here you have some more geo information. The fork is a Identiti 30mm rake, and beacause it's a bit higher than the original one it makes the HA about 73º.

Back in 2009 was my first "proper" polo bike....

Does anyone happen to know what the bastards at customs charge on the import of an Hija nowadays? ($500)

Arn´t they shipped from Spain? No custom charges?...

couldn't be arsed with a hacksaw...

^ Power or cordless ?

power, with 80grit sanding disc.

It is shipped from Peru. If you are lucky nothing

Is that yours Apollo?

nope...

looks sweet though

http://yokeiseasy.com/

Top of those fork legs might fail a tournament bike safety check.

Most who have used segmented forks for polo have bent or broken them. I'd stick to unicrown if I had the choice.

unicrown looks nicer too!

http://static.lfgss.com/attachments/80684d1393490776-polo-bike.jpg

the other end of the price spectrum....

Best polo gate eva!

it might be the only barspinable gate in the shire.