You are reading a single comment by @primitive_robot and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@primitive_robot
hey all,
picked up a beater track frame and now in need of some forks, its 54cm (need to measure headtube) so something that will fit that with a normal sized headset, I assume this will be around 180mm steerer? maybe 185mm? around this or a bit longer should be fine as long as I can trim it to suit (i.e. enough of the steerer is threaded)
ideally after some 80s-ish track forks, older or newer probably fine, would be good if drilled or can be drilled, not after straight blades, or slack geo........track forks might be hard to find so am open to offers on decent road forks
cosmetically they can be rough (paint chips etc), but no bent / damaged forks please
thanks