You are reading a single comment by @drøn and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@drøn
haha
I can not sneak in and do more sadly. They are becoming very strict now. And I have done quite a few private projects there so they are always very suspicious when I show up.
There is another laser cutting service, but they would charge around 80 pounds for the mdf bits. Then you'll have to factor in the metal bits, packing and shipping etc.
I have designed a reference stick that is cut from 2mm hdf. I'd like to avoid having to cut 2 different thicknesses so that have to be addressed too.
I solved the stability problem by screwing another piece of wood into the sliding towers feet from the underside of the base plate.
And, yes, the wheel holding forks will be replaced with metal.