Current Projects chat and miscellany

I was thinking about maybe building this up for myself. It is a prototype Merckx titanium frame. I have no idea whether I will fit on this frame though, seeing as my expertise on geometry is pretty much non-existent. My instinct says no, giving the short head tube, but the top tube says yes. For your information, my length is 1,90m and my inseam is 90cm (if I recall correctly). Any thoughts on this matter?

The geometry specifics are:

Head tube: 11,9 cm
Top tube: 61 cm (C-C)
Seat tube: 54,5 cm (C-C), 55,5 cm (C-T)
Seat tube angle (approx): 63 degrees, measured between top tube and seat tube
Head tube angle (approx): 69 degrees, measured between top tube and head tube.
Chain stay length: 48 cm, measured from center of BB to the back of the dropout

regarding your size onyl top tube is right. you need quite a lot of seatpost and also a spacer steck and stem upwards.
or you ride with a lot of saddle to bar drop!

i'm 192cm with an inseam of 92cm and would never ever build this up for me