You are reading a single comment by @PhilDAS and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@PhilDAS
Although, Just checked and the wheel spacing is obviously 120
The frame however, I'm not sure whether it was a different spacing and has been changed but seems to be 120 as well. Its that with the nuts tightened, the gap between the inside surface of the nut and the outside surface of the hub is a good 7mm.
The dropouts are just about 4mm wide so although the spacing is correct, they don't fit.
I can just get those spacers and put them on the outside of the dropouts, before the nuts?