You are reading a single comment by @nuovo_record and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@nuovo_record
i've quickly screwed the shimano BB in drive side, attached the crank and fitted the rear wheel to take some measurements and taken a few photos....
from the stay to the spider it's about 5mm, and from the stay to the chainring about 10mm.
as it is the chainline seems to be pretty straight
just googled sheldon browns website:
If you install an ISO crank on a J.I.S. spindle, it will sit about 4.5 mm farther out than it would on an ISO spindle of the same length.
so 111mm may be fine then, i 'll try and borrow one to see if it fits...
3 Attachments