A bit of a hitch has delayed the build up, I ran a fair bit of linseed oil around the inside of the tubes at the end of last week to be doubly sure of rust proofing. In my efforts to clean it from the frame I managed to spread a very thin layer all over the outside. This resulted in a tacky feel that felt like it was going to get dust and all sorts of crap stuck to it. Meths and isopropyl didn't cut through it at all, but some furious rubbing with a polishing cloth seems to be doing it. Pain in the arse, kinda wish I hadn't bothered with the linseed now.
A bit of a hitch has delayed the build up, I ran a fair bit of linseed oil around the inside of the tubes at the end of last week to be doubly sure of rust proofing. In my efforts to clean it from the frame I managed to spread a very thin layer all over the outside. This resulted in a tacky feel that felt like it was going to get dust and all sorts of crap stuck to it. Meths and isopropyl didn't cut through it at all, but some furious rubbing with a polishing cloth seems to be doing it. Pain in the arse, kinda wish I hadn't bothered with the linseed now.