You are reading a single comment by @dallas and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@dallas
I used twist knot wire brush mounted on a grinder when I did my Raleigh, gets paint and rust off no problem but you need something smaller in the frames angles, drill mounted small wire brush was what I used. You will achieve a better finish if you go to bare metal as it provides a more uniform surface to start on.
(Wear goggles if you value your eyes though)