1. Home
  2. Classifieds
  3. Components and clothing

For Sale: Slam that stem - low stack headset cover

Posted on
Page
of 41
First Prev
/ 41
Last Next
  • • #126
    1. branwen 45/1.5/1/black

    (are .5mm's okay? I'm assuming its slightly better to go lower and have a slight gap, then having to shim to keep it free?)

    0.5mm increments are OK, but <2mm isn't. The gap should be the smallest that never makes contact, it's part of the general design of integrated headsets that you might have to put one or more shims on top of the compression ring to acheive that.

  • • #127

    Sorry yeah, just read your response to nellyp, edited back to 2mm. Didn't think you would be able to get a .5mm shim

    1. mdcc_tester 45/2/2/Black
    2. abyrnesmith 48/3/1/Black
    3. 'dan 45/2/1/Black
    4. miro_o 46/3.5/1/Black
    5. Dmayn91 45/3/1/Black
    6. Object 46/2/2/Black
    7. Laner 46/2/1/Black
    8. Laner 45/2/1/Black
    9. Keyfour 49.5/2/1/Black
    10. danieldan 45/2/1/Black
    11. Rodolfo 45/3/1/black
    12. Waffle 47/2/1/black
    13. Nellyp 49/1.5/1/black
    14. mustard 48/2/1/black
    15. mustard 45/4/1/black
    16. chickenbourne 47/2/1/black
    17. Syntret 46/3/1/black
    18. mustard 47/2/1/black
    19. branwen 45/2/1/black
    20. loc 45/2/1/black
  • • #128

    Didn't think you would be able to get a .5mm shim

    You probably can't, you'll want to see whether two or three 0.2mm shims get your gap minimised without allowing contact. Because the compression ring is an inclined plane, it sits lower in the bearing after setting the preload than it does when loose, and the amount by which it does that varies by the tolerance on the steerer diameter, hence the need to shim it.

  • • #129

    Hope I am not too late. I really need one for my CAAD10.

    1. mdcc_tester 45/2/2/Black
    2. abyrnesmith 48/3/1/Black
    3. 'dan 45/2/1/Black
    4. miro_o 46/3.5/1/Black
    5. Dmayn91 45/3/1/Black
    6. Object 46/2/2/Black
    7. Laner 46/2/1/Black
    8. Laner 45/2/1/Black
    9. Keyfour 49.5/2/1/Black
    10. danieldan 45/2/1/Black
    11. Rodolfo 45/3/1/black
    12. Waffle 47/2/1/black
    13. Nellyp 49/1.5/1/black
    14. mustard 48/2/1/black
    15. mustard 45/4/1/black
    16. chickenbourne 47/2/1/black
    17. Syntret 46/3/1/black
    18. mustard 47/2/1/black
    19. branwen 45/2/1/black
    20. loc 45/2/1/black
    21. mooscot 47/2/1/black

    Thank you!

  • • #130

    Hope I am not too late.

    You're all right, the new machinist I'm hoping to use is being slow about getting back to me with pricing, so the list isn't closed yet.

  • • #131

    After a remeasure with some better Verniers I'm changing mine if I'm not too late!

    1. mdcc_tester 45/2/2/Black
    2. abyrnesmith 48/3/1/Black
    3. 'dan 45/2/1/Black
    4. miro_o 46/3.5/1/Black
    5. Dmayn91 45/3/1/Black
    6. Object 46/2/2/Black
    7. Laner 46/2/1/Black
    8. Laner 45/2/1/Black
    9. Keyfour 49.5/2/1/Black
    10. danieldan 45/2/1/Black
    11. Rodolfo 45/3/1/black
    12. Waffle 47/2/1/black
    13. Nellyp 48/3/1/black
    14. mustard 48/2/1/black
    15. mustard 45/4/1/black
    16. chickenbourne 47/2/1/black
    17. Syntret 46/3/1/black
    18. mustard 47/2/1/black
    19. branwen 45/2/1/black
    20. loc 45/2/1/black
    21. mooscot 47/2/1/black

    Thank you![/QUOTE]

  • • #132
    1. mdcc_tester 45/2/2/Black
    2. abyrnesmith 48/3/1/Black
    3. 'dan 45/2/1/Black
    4. miro_o 46/3.5/1/Black
    5. Dmayn91 45/3/1/Black
    6. Object 46/2/2/Black
    7. Laner 46/2/1/Black
    8. Laner 45/2/1/Black
    9. Keyfour 49.5/2/1/Black
    10. danieldan 45/2/1/Black
    11. Rodolfo 45/3/1/black
    12. Waffle 47/2/1/black
    13. Nellyp 48/3/1/black
    14. mustard 48/2/1/black
    15. mustard 45/4/1/black
    16. chickenbourne 47/2/1/black
    17. Syntret 46/3/1/black
    18. mustard 47/2/1/black
    19. branwen 45/2/1/black
    20. loc 45/2/1/black
    21. mooscot 47/2/1/black
    22. apc 47/2/1 black


    im copying mooscot as I also have a caad10 but no way of measuring, hope you got your measurements right bud!

  • • #133

    List is now closed to odd sizes, there will be spares in 2mm deep × 45/46/47mm diameter so if you want to dibs one of those add your name.

  • • #134

    Any info about schedule?

  • • #135

    They are at the machinists (well, the metal and the intention to cut it is), but one of the ways to keep the price down is not to insist on jumping on the lathe when they have more lucrative and urgent jobs to do. I'll give them a nudge next week if they haven't done them by then, after that it's probably about a week maximum at the anodisers (same principle), then they will be ready to ship.

  • • #136

    Thanks for the info! I'm not in a hurry, so no need to speed things up. Keep up the good work!

  • • #137

    Does anyboby know what size fits for Specialized Allez? I don't have the bike to measure.

  • • #138

    List is now closed to odd sizes, there will be spares in 2mm deep × 45/46/47mm diameter so if you want to dibs one of those add your name.

    I have, yet again, been fecked about. So would like one of the spares if there's one going in my size. Still massively keen to get a HTFU top cap BTW.

    1. mdcc_tester 45/2/2/Black
    2. abyrnesmith 48/3/1/Black
    3. 'dan 45/2/1/Black
    4. miro_o 46/3.5/1/Black
    5. Dmayn91 45/3/1/Black
    6. Object 46/2/2/Black
    7. Laner 46/2/1/Black
    8. Laner 45/2/1/Black
    9. Keyfour 49.5/2/1/Black
    10. danieldan 45/2/1/Black
    11. Rodolfo 45/3/1/black
    12. Waffle 47/2/1/black
    13. Nellyp 48/3/1/black
    14. mustard 48/2/1/black
    15. mustard 45/4/1/black
    16. chickenbourne 47/2/1/black
    17. Syntret 46/3/1/black
    18. mustard 47/2/1/black
    19. branwen 45/2/1/black
    20. loc 45/2/1/black
    21. mooscot 47/2/1/black
    22. apc 47/2/1 black
      ---------closed----------
    23. Smallfurry 45/2/1/black
  • • #139

    Back from the machine shop, off to the anodiser on Monday

    1 Attachment

    • PICT1234.JPG
  • • #140

    That's 135g of covers from 2.2kg of bar stock

  • • #141

    Still massively keen to get a HTFU top cap BTW

    List here

  • • #142

    Can I dibs 2 of the 47mm?
    Edit: its upthread.
    Pm'd.

    1. mdcc_tester 45/2/2/Black
    2. abyrnesmith 48/3/1/Black
    3. 'dan 45/2/1/Black
    4. miro_o 46/3.5/1/Black
    5. Dmayn91 45/3/1/Black
    6. Object 46/2/2/Black
    7. Laner 46/2/1/Black
    8. Laner 45/2/1/Black
    9. Keyfour 49.5/2/1/Black
    10. danieldan 45/2/1/Black
    11. Rodolfo 45/3/1/black
    12. Waffle 47/2/1/black
    13. Nellyp 48/3/1/black
    14. mustard 48/2/1/black
    15. mustard 45/4/1/black
    16. chickenbourne 47/2/1/black
    17. Syntret 46/3/1/black
    18. mustard 47/2/1/black
    19. branwen 45/2/1/black
    20. loc 45/2/1/black
    21. mooscot 47/2/1/black
    22. apc 47/2/1 black
      ---------closed----------
    23. Smallfurry 45/2/1/black
    24. Eyebrows 47/2/2/black?
  • • #143

    List here

    Added myself.

  • • #144

    damn, I want one of these but have no idea what size I would need. Any ideas re: BMC SLC01?

  • • #145

    damn, I want one of these but have no idea what size I would need. Any ideas re: BMC SLC01?

    Does it have one of these?

    http://www.fullspeedahead.com/storage/insidetech/items/EN_cd23382e-7b8d-489f-8172-234f31524569_Orbit%20IS%20Carbon.pdf

    Mine had a bloddy 17mm stack. Down to 8mm now. Pretty sure we want 45mm diameter / 2mm lip.

  • • #146
    1. mdcc_tester 45/2/2/Black
    2. abyrnesmith 48/3/1/Black
    3. 'dan 45/2/1/Black
    4. miro_o 46/3.5/1/Black
    5. Dmayn91 45/3/1/Black
    6. Object 46/2/2/Black
    7. Laner 46/2/1/Black
    8. Laner 45/2/1/Black
    9. Keyfour 49.5/2/1/Black
    10. danieldan 45/2/1/Black
    11. Rodolfo 45/3/1/black
    12. Waffle 47/2/1/black
    13. Nellyp 48/3/1/black
    14. mustard 48/2/1/black
    15. mustard 45/4/1/black
    16. chickenbourne 47/2/1/black
    17. Syntret 46/3/1/black
    18. mustard 47/2/1/black
    19. branwen 45/2/1/black
    20. loc 45/2/1/black
    21. mooscot 47/2/1/black
    22. apc 47/2/1 black
      ---------closed----------
    23. Smallfurry 45/2/1/black
    24. Eyebrows 47/2/2/black?
    25. danb 46/2/2/black
  • • #147
    1. mdcc_tester 45/2/2/Black
    2. abyrnesmith 48/3/1/Black
    3. 'dan 45/2/1/Black
    4. miro_o 46/3.5/1/Black
    5. Dmayn91 45/3/1/Black
    6. Object 46/2/2/Black
    7. Laner 46/2/1/Black
    8. Laner 45/2/1/Black
    9. Keyfour 49.5/2/1/Black
    10. danieldan 45/2/1/Black
    11. Rodolfo 45/3/1/black
    12. Waffle 47/2/1/black
    13. Nellyp 48/3/1/black
    14. mustard 48/2/1/black
    15. mustard 45/4/1/black
    16. chickenbourne 47/2/1/black
    17. Syntret 46/3/1/black
    18. mustard 47/2/1/black
    19. branwen 45/2/1/black
    20. loc 45/2/1/black
    21. mooscot 47/2/1/black
    22. apc 47/2/1 black
      ---------closed----------
    23. Smallfurry 45/2/1/black
    24. Eyebrows 47/2/2/black?
    25. danb 46/2/2/black
    26. swillis 47/2/1 black
  • • #148

    Does it have one of these?

    http://www.fullspeedahead.com/storage/insidetech/items/EN_cd23382e-7b8d-489f-8172-234f31524569_Orbit%20IS%20Carbon.pdf

    Mine had a bloddy 17mm stack. Down to 8mm now. Pretty sure we want 45mm diameter / 2mm lip.

    Yep - huge great ugly thing. Will take a punt on that size I guess.

  • • #149
    1. mdcc_tester 45/2/2/Black
    2. abyrnesmith 48/3/1/Black
    3. 'dan 45/2/1/Black
    4. miro_o 46/3.5/1/Black
    5. Dmayn91 45/3/1/Black
    6. Object 46/2/2/Black
    7. Laner 46/2/1/Black
    8. Laner 45/2/1/Black
    9. Keyfour 49.5/2/1/Black
    10. danieldan 45/2/1/Black
    11. Rodolfo 45/3/1/black
    12. Waffle 47/2/1/black
    13. Nellyp 48/3/1/black
    14. mustard 48/2/1/black
    15. mustard 45/4/1/black
    16. chickenbourne 47/2/1/black
    17. Syntret 46/3/1/black
    18. mustard 47/2/1/black
    19. branwen 45/2/1/black
    20. loc 45/2/1/black
    21. mooscot 47/2/1/black
    22. apc 47/2/1 black
      ---------closed----------
    23. Smallfurry 45/2/1/black
    24. Eyebrows 47/2/2/black?
    25. danb 46/2/2/black
    26. swillis 47/2/1 black
    27. dan 45/2/1 black
  • • #150

    Yep - huge great ugly thing. Will take a punt on that size I guess.

    I swapped mine for a 8mm carbon ebay jobbie. Needed some dremel work to get it snug though.

Page
of 41
First Prev
/ 41
Last Next
  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
Post a reply
About

For Sale: Slam that stem - low stack headset cover

Posted by Avatar for gbj_tester @gbj_tester

Actions

About Terms of Use Privacy Policy Cookie Policy Report a problem