You are reading a single comment by @Vince and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Vince
Recently bought off the forum for a build I am doing for a friend, but unfortunately he wants silver...
TL;DR - Velosolo 40cm risers + 80mm quill stem, in black, cheap, BUY THEM
I paid £20 for the combo, I want £20 back please - see below for prices new.
A couple of nicks as can be seen on the pics, all good/straight/uncrashed otherwise.
Pick up from Chancery Lane.
Cheers
Vince
VS Pre-Cut 40cm Riser Bar
This is our new and improved cut-down riser. As before, not being able to find a riser bar in the required width we have secured a stock of NOS mountain bike risers and had them reduced to a more suitable narrow width for urban use of 40cm. Ready to fit with grips of your choice (not usable with 'lock-on' type grips). Rise is approximately 30mm with slightly swept back ends. Stiff and strong and ideal for commuting and city use.
These are now professionally cut down by our UK engineers for an even better 'factory finish' with chamfered and machined ends inside and out. Finished in polished aluminium alloy or black. In addition all bars now have the VeloSolo logo laser engraved as with our Squeeze bars above.
Fits any 25.4 stem or use a Nitto shim to fit to 26.0mm stem. If you run a non-threaded fork the BBB stem further down is ideal with these bars.
£21.95
Stock photo here: http://www.velosolo.co.uk/vsriser.html
**Zenith (Gran Compe) Forged Quill Stem 25.4mm - short quill **
As with Andel and Surly cogs so it is with Zenith and Dia Compe - this is the exact same stem Zenith manufacture for Dia Compe but unbranded and logo free. Our most popular stem. Not having a GC logo makes it around £15 less and superb value.
Manufacture is equally good being forged, with high quality machining and a very attractive black anodized finish. Clamp is 25.4mm, length is 80mm, finish in black. Quill is 22.2mm (standard 1") for threaded steerer. Angle is 73 deg.
£21.95
Stock photo here: http://www.velosolo.co.uk/zenithgc.html
Mini Grips are mini and grippy. RRP £5
Rubbish photos here, you get the idea, right?
