You are reading a single comment by @gbj_tester and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@gbj_tester
If you have just less than 2mm between top of compression ring and top of head tube, the size you specified will leave slightly less than no gap, so you'll probably need to add a shim. I think the standard Cane Creek shins are 0.2mm, so you should be able to shim the gap to a maximum of that.