Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.
Tips:
For a full reference visit the Markdown syntax.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
I've bought a Miche Primato Advanced crankset for my Precursa (BB 107mm included ENG threading.) I was told by retailer that they were reduced price due to scuffing on the logos etc and also that 107mm would work well with the frame as they had bought them to make up Precursa builds.
I've search for this, but can't find what torque the BB is supposed to be tightened to. The cranks read: 35nm. Please can anyone help?
I have fitted both (not to ride) just to see what clearance was like, it was less than 1mm clearance between the stays and the teeth of the crank on either side. The crank does spin freely but I think if there was any flex it would foul the frame. I know that there are threads about this issue.