Home DIY

Gents, just wanted to check something with you. I had one of these installed in my kitchen.
http://www.screwfix.com/p/mk-logic-plus-1-gang-2-way-dimmer-switch-mains-low-voltage-400w-white/48466

It died. First it stopped working as a dimmer, but still worked as a light switch. But then I noticed it started getting really hot, so hot the plastic eventually cracked. A fire hazard of course to I de-installed it. Screwfix were great and sent me a new switch without fibbing. But before I install it again I need to check whether this happened because of me overloading it.

I had it running two of these:
http://www.madeindesign.co.uk/prod-e27-pendant-by-muuto-ref5112.html

One with a 60 W bulb and one with a 100 watt bulb. These kind of bulbs:
http://www.lamps-on-line.com/globe-120mm-230v-100w-e27-clear.html

Am I OK to install again or would that be heading to crazy town?

installing these in moisture rich environments reduces their working life, contaminants in kitchen/bathroom vapours deposit on surfaces and eventually lead to tracking and short circuit of electronics

replace and pop a small sachet of silica gel in the wall pattress, will help delay the next catastrophic event