You are reading a single comment by @gbj_tester and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@gbj_tester
So, I actually got around to doing a new drawing, MK2 version will have a radius where the Mk1 had a chamfer. I'm going to get some made with 45mm diameter and 2mm inside depth, same dimensions as before to fit Cane Creek headset type IS41, 41.0mm/36°/45°. If anybody wants any other sizes, speak now or forever hold your peace. 46mm diameter should be right for anything with a Campag style headset, type IS42, 41.8mm/45°/45°, but I can do bigger ones for anybody with a really thick walled head tube. Now is the time to tell me if you need more skirt depth to get the cover to fit close to the top of the head tube. Obviously, I could make them all deep and let you shim between the compression ring and the cover to fine tune the clearance, but that kind of defeats the object of slammage.
Also, let me know if you want one in raw finish (silver), and I'll pull one out between lathe and anodising bath.
1 Attachment