Dolan Pre Cursa / PreCursa / Track Champion

My 58 Precursa's top tube is 570 ctc, just measured it there.

Also the seat tube from centre to top of the seatpost collar is 580.

Is that chart really accurate? pretty whopping difference there in TT lengths between the 58 and 60cm sizes (35mm!). Guess the 1° difference in ST angle mitigates that slightly but still. Normally i'd ride a 60x57/58 track frame but I can't get my mind around the Dolan sizing at all.

Write them an email an ask for the measurement - they've fucked up the geometry chart so many times they'll be glad to re- measure again if prompted :]

My 58 Precursa's top tube is 570 ctc, just measured it there.

Also the seat tube from centre to top of the seatpost collar is 580.
Same! But my pre cursa has a compact geo..

](http://www.flickr.com/photos/94742437@N07/9631000296/in/photostream/lightbox/)[/IMG]

here's mine, almost finished...

http://static.lfgss.com/attachments/72609d1377730512-photo0041_r.jpg

that is one hell of a spacer

Paging scoble...

](http://www.flickr.com/photos/94742437@N07/9631000296/in/photostream/lightbox/)[/IMG]

Your saddle is pointing to your front wheel

Anti-scoble protest?

Your saddle is pointing to your front wheel
Yeah .. I know. :/ The saddle and angle was changed straight after the pictures were taken. I was trying out different saddles and different angles to see which one suited me best.

Hey. I'm 5.7ft, which frame size should I get 52 or 56cm? I just a read a few times that the dolan frame detail measurements are said to be a bit off so just wanted someone in the know to advise. Thanks so much.

So many factors in play other than just your height... If in doubt choosing between the two maybe the 54 would be more suitable?

I'm 5ft7, and have ridden a 52 and a 54. the 52 fit me better.

im 5"6 and ride a 48. Must have short legs

6ft size 54 - aggressive setup.

I'm 5.7ft my self, i rode a 52cm but i was 1 or 2" shorter back then, id ride a 54cm now, would need a short reach though i guess

Thanks for replies

https://lh5.googleusercontent.com/-O-sHr8P4Qqk/Ui2-T3QmEwI/AAAAAAAAB5o/3-dzzyPmEZM/w1046-h785-no/P9092237.JPG

Made a few changes to the setup. I bought a -96 Flite and drilled my Alpina for a brake. Also painted my cranks black.

^ Nice, are those the Aplina forks in matte?

They are Alpina but shiny.

How'd you loose the logos?

Nice build by the way.

^Thanks! I painted them with a black permanent marker.

changed the stem, an' bloody slammed it!

1 Attachment

changed the stem, an' bloody slammed it![/IMG]

Slammed down to the spacer? o.O

All in moderation A&P, all in moderation...