Bar wrap porn

Now for some taping. First work out which colours you want to be little triangles at the start of the wrap, and which to be the first full squares. I wanted blue as the first squares soooooo, blue first with the other 'apearing' colour

with the slanty cut parallel to the extra bit of tape (gaffa in my case). Now the next layer.

Here you need the next layer to cross the previous at the edge of the gaffa tape and the slanty cuts to be on the same parallel for both layers. If you don't understand you're probably not geeky enough to ever bother doing this, so meh.

Now onto the bars. I want the first blue square to be at the top of the bars so I made sure it was there, and also on top as that made sense when it came to the next step. I had to start this a few times and do some head scratching and hand waving.

Now to fold the grip tape over and start the weave. This weave is complicated and the grip tape WILL stick to something it's not meant to (usually itself) before you get it in the right place. Here is a bad photo of the first fold: