Current Projects chat and miscellany

Problem, i was fitting a brake on the Vivalo so i can do some club/charity rides, but it rubs on the headset slightly, i guess just filing the bolt down is my only option? i'll try higher it and dropping the pads down, but not sure it will be enough

ill put some pvc tape over those clamps...

See the tiny little scew down below with the spring on it? you screw that all the way in (screw head ought to be on the front iirc so slip in the screwdriver in from the front under the brake). It'll go in far enough to eventually push on the fork bridge, in doing so it will push away the upper screw from the headset.