If it's like the one on the SLC01 then you need to be very careful with torque.
Top bolt: 5nm Bottom bolt: 7-8nm
Torque the lower one first, then the top, then re-torque the lower one to regain torque lost during equalising the pressure distribution on the clamp.
@dan started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
If it's like the one on the SLC01 then you need to be very careful with torque.
Top bolt: 5nm
Bottom bolt: 7-8nm
Torque the lower one first, then the top, then re-torque the lower one to regain torque lost during equalising the pressure distribution on the clamp.