You are reading a single comment by @ffm and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@ffm
Saddles, seatposts etc.:
[strike]1 - Scape (Cube OEM) saddle [strike]£4[/strike]** >>> £3 sold Brameses– Good nick, grey and black (+ red underneath), looks a bit like a wide short Arione [/strike]
2 - Carrera saddle [strike]£3**[/strike] **>>> £2/nice beer **Dibs sacredhart – Fairly big and comfy, slight tear at the nose.
3 - Ridgeback saddle [strike]£5[/strike]** >>> £4** – Barely used, swapped off a bike very shortly after purchase. Well padded.
[strike]4 - San Marco rolls saddle £5 **sold christono **– Mauve, pretty ratty, rails are rusty and it has a couple of holes towards the back. Still comfy though[/strike]
[strike]5 - Push seatpost £5 **sold **jackbepablo – silver, 26.4mm, 300mm from rails to minimum insertion mark. Pretty scratched but shiny towards the top[/strike]
[strike]6 - Scape (Cube OEM) seatpost [strike]£5[/strike]** >>> £4 sold TTM** – grey, 31.6mm, 270mm from the saddle rails to the limit mark, quite a nice 2-bolt clamp design. It's lost some of the anodising, but has no deep scratches.[/strike]
[strike]7 - Kalloy suspension seatpost £3 sold to peck123 – black, 27.2mm, 250mm from rails to minimum insertion mark. Recently stripped and serviced, boings as it should.
8 - Old-school steel seatpost £5 sold antlers – 25.4mm, about 100mm from rails to minimum insertion mark.
9 - Silver QR seat clamp FREECYCLED– for a 34.9mm seat tube as far as I can work out.
10 - Selle Royal saddle £7 **Dibs antlers **- Grey, moderately ratty. Has some paint splatter and two small tears (both visible in 2nd photo below). The cover has some dents at the back where I used pegs in re-gluing to the base, but these may disappear with use.[/strike]
/attachments/66863
Wheels
[strike]Shimano/Mavic 700c front wheel £20** >>> £17.50** now front wheel only >>> £10 sold gino – Shimano RX100 hub laced to Mavic 190 NE 1er Monte/OEM rim with stainless spokes.[/strike] Rear RX100 hub available below.
[strike]Maillard/Raleigh 700c front wheel £10** >>> £8**>>> £7 sold sacredhart – Maillard hub laced to Raleigh chromed steel rim with rustless spokes (36). The rim has a few rust spots but is in generally good condition and runs nice and true. The hub is in good condition and I've just repacked it so it spins smoothly. Includes rim tape, tube and a gumwall tyre that may be usable (can’t guarantee). I think this didn’t see much use before being stored. The matching rear hub is listed below (#3) so could be useful for someone building a SS wheelset.[/strike]
Sachs/Sunn rear 26” (MTB) wheel £12 Sachs Sunn hub, Sunn rim (made by Rigida), 135mm OLN, will take a 9-speed Shimano cassette. Nice and true, spins smoothly but is not perfectly buttery, minimal wear to braking surface. Quite a nice wheel really. Comes with innertube and Innova 1.6 semi-slick/town tyre with plenty of life left.
/attachments/67308
2 Attachments