You are reading a single comment by @Andrew and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Andrew
Hi there, I used to have a Monocog, and it got stole. So now I only have the original forks - I had upgraded before it went missing. Don't worry, I bought a new one, took the chance to upgrade to the Flight, so everything is fine now.
Anyhoo... I have the forks to sell. They have a short steerer, 185mm. Brown, with disc and canti mounts. I should have measured the length crown to axle... maybe I will get around to that tonight. Does anyone have advice on the proper length to measure. From the centre of the axle, OK, but where on the crown - to the max tyre clearance?
The star nut is still in there.
And finally, some photos:
That's not rust, just cobwebs!
I think that a tenner should do it. I will deliver if you are London zone 1 or 2. Unless you want to come to me at home in Islington or at work in Fetter Lane.