For Sale: Gayas Korean Track Frame, Tight Clearance Forks, Dura Ace 7600 Wheel Set

Double Post, Please Delete!

Not enough time to finish the project and I'm going to be a dad so other priorities take control.

Please see the folder link at the end of add for more pictures.

I'm located in Brighton by the station and would prefer collection as i have had bad experiences with couriers/postage in the past but can get some prices if you are desperate and dont fancy a day of sea air!

Frame - It is a frame by Korean company Gayas size is 49.5cm centre to top, 51cm top tube centre to centre, stand over height is 77cm.
frame comes with tange headset & bb and a 26.2mm Kalloy seat post, the rear brake bridge is drilled for a brake. There are a few marks and scuffs to the paint but no dents or cracks - £175

Forks - Dont know much about them other than they have campagnolo dropouts, a drilled bridge and are quite close clearance. They appear to have a quill stuck in the bottom of the steerer but wont affect useage just weight. Steerer length is 237mm with a 41mm threaded section - £45

Wheels - 36H Dura Ace NJS hi-flange hubs (double sided)
laced to Ambrosio Nexus 60th Anniversary rims (with braking surface, which has never seen a brake) using black spokes. They were built by Brighton wheel-building legend, Richard Holkham at Baker St bikes.
only ever been used on track, all free and smooth. Tyres are pretty much junk but I kept them on to avoid damaging wheels in storage - £225

Additional pictures are here - - > http://s140.photobucket.com/albums/r15/awinedesign/bike%20bits/

Everything is also for sale but was going to chuck it on ebay so if anything tickles your fancy let me know before it goes to the vultures.

Thanks

Alex - Zero 7 7 Six One 7 8 Three One Zero 4

Lush, lush, lush!!!!

dat paintjob

Can't resist the obvious: 'Gay-as' frame being based in Brighton of all places. Sorry. Really beautiful frame though, someone pick it up!

Probably wouldn't be much of a hassle to add an extra "S" to the end..

Thanks so much for your support!

I have now put my Gay-Ass in a box (No euph) and can courier via UPS Economy for £14 in the UK.

To add some details to the wheels, they are 8mm axle on front hub and the rear hub a 10mm with a rear spacing of 110mm.

Hub is double fixed and comes with a 15T cog and lock ring not sure on brand of these.

They have also been boxed and can also be sent for £14 via UPS Economy in the UK.

Open to offers, lots of PM's but no money has graced my PayPal/Hand yet!