^ I think you should brush up a bit on your facts .. troll or not
Lew folded (or his business failed) had nothing to do with the pro riders ! And your statement "no more black markers" ! Have you looked at a pro bike recently ? Wiggins the man of the hour is riding blacked out O.Symetric rings, wheels with Hed rims, Chris King and Tune hubs to name a few obvious components .. and Sky's sponsor is? Shimano ..
I am not familiar with Mssr Wiggens contract--- nor with the sponsoring contracts that Sky has entered into. From your comments, however, you are suggesting that Wiggens, beyond any contractual obligations to which I am not privy, may have violated UCI rules on the use of non-standard wheels. A HED deep section rim spoked to King or Tune hubs constitutes a "non-standard" wheel and must be first authorized by crash testing to be used in anything other than time trials. Only "traditional" wheels are exempt from model testing and a " traditional wheel is deemed to be a wheel with at least 16 metal spokes; the spokes may be round, flat or oval, provided that no dimension of their cross sections exceeds 2.4 mm; the section of the rim must not exceed 2.5 cm on each side. (UCI). The HED S3 rim is 33mm deep-- and the others are deeper. There is no such wheel on the UCI list. The HED Stinger 4,5,6,7 and 9 wheels are on the list but these are "as supplied and tested", e.g. a custom wheel built by someone else does not come under the approval. Did Wiggens/Sky again violate UCI equipment rules--- which were also violated at the Olympic games?
I am not familiar with Mssr Wiggens contract--- nor with the sponsoring contracts that Sky has entered into. From your comments, however, you are suggesting that Wiggens, beyond any contractual obligations to which I am not privy, may have violated UCI rules on the use of non-standard wheels. A HED deep section rim spoked to King or Tune hubs constitutes a "non-standard" wheel and must be first authorized by crash testing to be used in anything other than time trials. Only "traditional" wheels are exempt from model testing and a " traditional wheel is deemed to be a wheel with at least 16 metal spokes; the spokes may be round, flat or oval, provided that no dimension of their cross sections exceeds 2.4 mm; the section of the rim must not exceed 2.5 cm on each side. (UCI). The HED S3 rim is 33mm deep-- and the others are deeper. There is no such wheel on the UCI list. The HED Stinger 4,5,6,7 and 9 wheels are on the list but these are "as supplied and tested", e.g. a custom wheel built by someone else does not come under the approval. Did Wiggens/Sky again violate UCI equipment rules--- which were also violated at the Olympic games?