Ive relisted this frame due to some folks deciding it was the ideal thread for an argument?
1955 Rotrax Vel D'Hiv
57cm square ctc, 100/110mm spacing, drilled fork, mudguard eyelets front and rear.
Its generally in good condition, it has a fair amount of light surface rust. It also has two dents one under the toptube and a very small one on the drive side seat stay.
The eagle eyed might notice it says Alan Richards on it but I can assure you that this is a Rotrax. Alan Richards owned a shop in Birmingham called Tower cycles.
The frame number which is stamped twice on BB and once on the fork steerer is 55441. According to a piece written by Hillary Stone on Classic lightweights the '55' is the year of manufacture.
Ive relisted this frame due to some folks deciding it was the ideal thread for an argument?
1955 Rotrax Vel D'Hiv
57cm square ctc, 100/110mm spacing, drilled fork, mudguard eyelets front and rear.
Its generally in good condition, it has a fair amount of light surface rust. It also has two dents one under the toptube and a very small one on the drive side seat stay.
Here are some more pictures;
http://s474.beta.photobucket.com/use...x%20Vel%20DHiv
The eagle eyed might notice it says Alan Richards on it but I can assure you that this is a Rotrax. Alan Richards owned a shop in Birmingham called Tower cycles.
Here he is;
http://www.flickr.com/photos/8729526@N02/5225227079/
http://forum.ctc.org.uk/viewtopic.php?f=1&t=48766
The frame number which is stamped twice on BB and once on the fork steerer is 55441. According to a piece written by Hillary Stone on Classic lightweights the '55' is the year of manufacture.
http://www.classiclightweights.co.uk...rotrax-hs.html
I would like £350
Im located in Tamworth just north of Birmingham, but I will happily box the frame up and post it.
Many thanks
Guy